FC-301P2K2T2134L2899 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T2134L2899 is part of the VLT FC 301 Automation Drives series and has a power rating of 2.2 kW with a 3.0 HP output. It operates on three phase 200 to 240 VAC mains voltage, featuring an efficiency of 0.96 and continuous output current of 10.6 A. The drive includes four programmable digital inputs and provides a starting torque of 160% for 60 seconds.
Internal Product Review
The FC-301P2K2T2134L2899 is a Danfoss VLT FC 301 automation drive rated at 2.2 kW for 200-240 VAC service. Efficiency of 0.96 and starting torque of 160% for 60 s make the unit a strong choice for stable motor control and confident startup performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T2134L2899 is a variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. By converting fixed-frequency three-phase mains power into a modulated output, the unit regulates motor speed and torque without mechanical throttling. It belongs to the VLT AutomationDrive FC product group and is typically installed inside control cabinets to control conveyors, pumps, or fans. Precise speed adjustment can lower energy use and limit mechanical wear in automated production lines.
The drive operates from a mains voltage range of 200–240 VAC and provides 10.6 A of continuous output current for small to medium-frame induction motors. At 230 V, the apparent power demand reaches 4.98 kVA, while the demand at 208 V is 3.82 kVA. These values help determine suitable upstream circuit breakers and supply cabling. The overall conversion efficiency is 0.96, resulting in 116 W of power loss that must be removed by panel airflow at the rated load. During dynamic braking, the internal DC link is energized to 365 V DC, while the protective logic issues a high-voltage warning at 405 V DC and an overvoltage alarm at 410 V DC. The inverter has a fundamental power limit of 2.2 kW. Four programmable digital inputs allow the drive to accept start, stop, and speed-reference signals directly from sensors or PLC contacts, reducing the need for external relays.
The unit can deliver 160% of rated torque for 60 s, providing additional starting capability during motor acceleration. Its rated mechanical output is approximately 3.0 HP at the motor shaft. Continuous operation is supported at ambient temperatures up to 45 °C without derating, which is suitable for many indoor control rooms. The power section uses three-phase power, and phase-imbalance protection trips the drive if line symmetry is lost. Continuous input current is 9.5 A, which should be considered when selecting supply conductors and protective devices. Cabinet ventilation must provide sufficient airflow to remove the stated power loss and maintain suitable operating temperatures around the drive.
