FC-301P2K2T2134L2627 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T2134L2627 is part of the VLT FC 301 Automation Drives series and offers a power rating of 2.2 kW, with a continuous output current of 10.6 Amps and an efficiency of 0.96. This drive supports three phase power operation at 200 to 240 VAC and provides a maximum starting torque of 160% for 60 seconds. It is rated for a maximum output frequency of 590 Hz and can operate at a maximum altitude of 1000 meters without derating.
Internal Product Review
The FC-301P2K2T2134L2627 is a Danfoss VLT FC 301 automation drive rated at 2.2 kW for 200-240 VAC systems. Drive efficiency of 0.96 and an IE2 energy efficiency class support economical operation in routine industrial duty. A 160% starting torque for 60 s stands out as a strong performance advantage for demanding starts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T2134L2627 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. It accepts three-phase low-voltage power and generates a pulse-width-modulated output whose amplitude and frequency can be adjusted in real time. Installed between the line supply and an induction motor, the drive provides closed-loop control over speed and torque, helping conserve energy and stabilize flow, pressure, or motion in automated HVAC, material-handling, and general manufacturing equipment.
At full rated output, the inverter delivers 2.2 kW, which corresponds to 3.0 HP of mechanical shaft power. It draws a continuous input current of 9.5 A and supplies a regulated output current of 10.6 A. The input range of 200–240 VAC enables direct connection to standard 230 V distribution panels without step-down transformers. Its efficiency is 0.96, which keeps thermal losses low, while power dissipation reaches 116 W under rated load. The apparent power requirement is 4.22 kVA, and the true power factor remains above 0.9, limiting reactive demand on the feeder. Flux-vector control operates at frequencies up to 300 Hz, providing a wide speed range for two-pole machines.
High-torque starts are supported by an overload capacity of 160% for 60 seconds, allowing heavy loads to overcome static friction without requiring a larger motor. The output frequency extends to 590 Hz, allowing the drive to operate high-speed spindles or specialized pumps without mechanical gearing. The unit maintains its full rating at elevations up to 1,000 m without derating. The maximum shielded motor-cable length is 50 m, which permits flexible placement of the motor away from the drive enclosure. A torque rise time of 1 ms supports rapid response to changing load demands, while the IE2 efficiency classification indicates efficient operation under typical industrial conditions.
