FC-301P2K2T2131X7295 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T2131X7295 is part of the VLT FC 301 Automation Drives series and supports a power rating of 2.2 kW with three phase power at 200 to 240 VAC. It provides a continuous output current of 10.6 amps and an output frequency range of 0 to 590 Hz. The drive features an efficiency of 0.96 and has an analog output range of 0/4 to 20 mA with 12-bit resolution.
Internal Product Review
The FC-301P2K2T2131X7295 is a Danfoss VLT FC 301 automation drive rated at 2.2 kW for 200–240 VAC service. High conversion quality comes through with 0.96 efficiency and a displacement power factor above 0.98, supporting stable operation in automated equipment. The 0–590 Hz output frequency range makes the drive a strong choice for flexible motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T2131X7295 is an AC variable-frequency drive produced by Danfoss as part of the VLT FC 301 Automation Drives series. The unit converts fixed-frequency three-phase mains power into a variable-frequency, variable-voltage output, allowing a control system to regulate induction motor speed and torque without mechanical throttling. Its enclosure supports panel or cabinet installation in pumps, fans, conveyors, and other material-handling equipment that requires precise speed regulation. The power section is suitable for the small to midsize motors commonly used on auxiliary machine axes.
The drive accepts a three-phase supply of 200-240 VAC and draws up to 9.5 A under continuous load. At the inverter output, insulated-gate bipolar transistors deliver 10.6 A RMS while reproducing up to 100 percent of the available supply voltage. The inverter can synthesize output frequencies of 0-590 Hz, supporting applications that use high-speed motors. Conversion efficiency reaches 0.96, resulting in 116 W of heat loss at the drive’s 2.2 kW rating. The line side maintains a displacement power factor above 0.98 and a true power factor of at least 0.9. It can operate from a 50 Hz or 60 Hz supply with a tolerance of plus or minus 5 percent, allowing use with common industrial power systems.
The analog port can be configured for a 0-20 mA or 4-20 mA process signal and provides 12-bit resolution for finely scaled speed references or feedback values. This channel can source or sink the selected current signal, supporting different control and monitoring arrangements. A transistorized logic terminal supplies up to 40 mA for compatible status or counter circuits, reducing the need for additional interface hardware. The internal DC link and filter section support a continuous apparent power of 4.22 kVA at 230 V, providing operating margin during periods of heavy acceleration. Integrated control and monitoring channels allow the converter to exchange process references, feedback signals, and operating status with the connected automation system.
