FC-301P2K2T2131G4525 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P2K2T2131G4525 is part of the VLT FC 301 Automation Drives series and is rated for 2.2 kW of power with a 3.0 HP output. This three-phase drive operates on 200 to 240 VAC mains voltage and delivers a continuous input current of 9.5 A with an efficiency of 0.96 at rated current. The drive provides a displacement power factor greater than 0.98 and can support a maximum output frequency of 590 Hz.
Internal Product Review
The FC-301P2K2T2131G4525 is a Danfoss VLT FC 301 automation drive rated at 2.2 kW for 200 to 240 VAC service. Efficient operation stands out with 0.96 efficiency at rated current and a displacement power factor above 0.98. Fast response is evident in 1 ms torque rise time in flux and 160% starting torque for 60 s/10 min, a strong combination for precise automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P2K2T2131G4525 is an AC variable frequency drive built by Danfoss for the VLT FC 301 Automation Drives series. This three-phase converter regulates the speed of induction motors used in pumps, conveyors, and general process equipment by adjusting the output frequency and voltage. The compact drive operates on 200–240 VAC networks and is intended for low-voltage industrial control panels. By converting fixed line power into a variable waveform, it allows connected control systems to regulate motor torque and energy use without mechanical throttling.
Supplied from a 200–240 VAC three-phase line, the inverter has a motor power rating of 2.2 kW and delivers 10.6 A through its output terminals. Its overall efficiency is 0.96, which limits the amount of heat released inside the enclosure during operation. The displacement power factor is greater than 0.98, while the true power factor remains at or above 0.9 to reduce reactive demand on the supply. The drive provides an output frequency of up to 590 Hz, although flux-optimized operation is limited to 300 Hz to protect standard motor insulation. A torque rise time of 1 ms supports rapid index moves and responsive changes in motor load. The built-in relay can switch 240 VAC at 2 A for coordinating external contactors or related control devices.
During startup, the unit can supply 160% of rated torque for 60 seconds every 10 minutes, providing breakaway torque for high-inertia loads. Continuous operation draws 9.5 A from the line, and the maximum power loss is 116 W, which supports branch-circuit and cabinet-cooling calculations. A 24 V control supply provides 200 mA for connected brakes or sensors, while each digital transistor output supplies 40 mA for status signaling. Shielded motor leads can extend up to 50 m, while unshielded leads can extend up to 75 m under the applicable installation conditions. These cable options allow the drive to be positioned within the control panel while the motor is installed elsewhere on the machine.
