FC-301P22KT2134L2676 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P22KT2134L2676 is a three phase drive from the VLT FC 301 Automation Drives series. It offers a power rating of 22 kW, 30 horsepower, and supports an output frequency range of 0 to 590 Hz. The drive works with a mains voltage of 200 to 240 VAC, mains tolerance of ±10%, and supports cable cross-sections up to 50 mm².
Internal Product Review
The FC-301P22KT2134L2676 is a Danfoss VLT FC 301 automation drive rated for 22 kW and 30 HP. Three-phase power input and 200 to 240 VAC mains support make the drive a very capable choice for dependable industrial motor control. An output frequency range up to 590 Hz is a standout performance advantage for demanding speed-control applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P22KT2134L2676 variable frequency drive is manufactured by Danfoss and belongs to the VLT FC 301 Automation Drives series within the wider VLT AutomationDrive FC product group. As a compact AC inverter, it modulates three-phase motor speed so conveyors, pumps, and similar machinery can match process demand while minimizing energy use. By integrating the control electronics and power stage in one unit, the drive simplifies installation in panels that already have 200–240 VAC power distribution.
Rated at 30 HP with an electrical output of 22 kW, the inverter connects to a 200–240 VAC supply using three-phase power. The input stage accepts voltage variations of ±10% and can tolerate a line imbalance of 3.0% of the rated value without derating. An internal rectifier converts the incoming AC power to DC for the intermediate circuit. The DC bus then supplies the inverter stage, which produces the controlled voltage and frequency needed by the connected motor. The drive operates with a supply frequency of 50/60 Hz ±5%, allowing use with common industrial power systems.
On the motor side, the inverter produces frequencies from 0–590 Hz, while flux-mode regulation is limited to 0–300 Hz for optimized magnetizing current. Output voltage can be adjusted from 0–100% of the supply voltage, and the control algorithm maintains a power factor of ≥0.9 at nominal load. Protective thresholds are integrated into the DC link: dynamic braking activates at 390 V DC, a high-voltage warning appears at 405 V DC, and an overvoltage alarm trips at 410 V DC. Cable terminals accept conductors up to 50 mm² (1/0 AWG), accommodating the wiring required for the rated output. Recommended motor cable lengths are 50 m for shielded runs and 75 m for unshielded runs to maintain electromagnetic compatibility performance.
