FC-301P22KT2131B6064 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P22KT2131B6064 is part of the VLT FC 301 Automation Drives series and offers a power rating of 22 kW with a 30 horsepower output. This drive operates on three-phase 200-240 VAC mains voltage and provides a continuous output current of 88 amps, with an overload class of 150 percent for 1 minute every 10 minutes. It features 4 programmable digital inputs and supports a maximum shielded motor cable length of 50 meters.
Internal Product Review
The FC-301P22KT2131B6064 is a Danfoss VLT FC 301 automation drive engineered for 22 kW operation on 200 - 240 VAC mains. Three-phase power and 88 A continuous output current give the unit confident motor handling and steady control response. A 150% overload class for 1 min/10 min is a strong advantage for short-term demand peaks.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P22KT2131B6064 is an AC variable frequency drive manufactured by Danfoss as part of the VLT FC 301 Automation Drives series. It is intended for variable-speed control of induction motors in conveyors, pumps, and other industrial machinery. By adjusting output frequency to match process demand, the drive supports stable motor speed control and efficient operation across a wide range of automated equipment.
The drive operates from a three-phase supply of 200 – 240 VAC and delivers a rated motor output of 22 kW, which is equivalent to 30 HP. Under nominal load, the input current reaches 80 A, while the inverter can supply 88 A of continuous motor current. At 230 V, the apparent power draw is 35.1 kVA, and the thermal design supports normal duty without derating. Short-term overload capability is limited to 150% for 1 min/10 min, allowing brief torque increases when the connected machine experiences a temporary load spike. The power stage uses three independent modules to keep phase loading balanced during operation.
The control section provides four programmable digital inputs, along with a 10 V reference that can supply 15 mA and a 24 V auxiliary output rated at 200 mA for external sensors. The built-in output relay supports AC-1 loads up to 240 V AC at 2 A for run or fault indication. Internal electronics dissipate 874 W of heat, so panel airflow must remove that heat during operation, and the drive can supply up to 132 A to the motor for sixty seconds during heavy acceleration. Recommended installation allows a shielded motor cable length of 50 m and an unshielded motor cable length of 75 m, while start sequences are limited to one power-up per minute to protect the DC-link capacitors.
