FC-301P22KT2131B5829 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P22KT2131B5829 is part of the VLT FC 301 Automation Drives series and offers a power rating of 22 kW with 30 HP output. Designed for three phase power supply at 200 to 240 VAC, it supports a control card scan interval of 1 ms and achieves a displacement power factor greater than 0.98. The drive features a starting torque of 160 percent for 60 seconds and overload torque of 110 percent for 0.5 seconds.
Internal Product Review
The FC-301P22KT2131B5829 is a Danfoss VLT FC 301 automation drive built for dependable motor control at 22 kW and 200 - 240 VAC. A 1 ms control card scan interval paired with a system response time of ≤2 ms supports precise regulation in dynamic applications. Strong drive behavior is reinforced by 160% starting torque for 60 s, making this unit an excellent choice for demanding automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P22KT2131B5829 is a variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency, three-phase mains power into a controlled output that matches motor load requirements. The unit adjusts the speed of induction motors used on conveyors, pumps, fans, and other industrial machinery. Its regulated acceleration and deceleration can lower energy consumption, reduce mechanical stress during startups and stops, and improve process control under changing loads.
Electrical performance centers on a continuous output of 22 kW when the drive is supplied with 200–240 VAC three-phase power. The control card scans every 1 ms, and the overall system response does not exceed 2 ms. A frequency resolution of ±0.003 Hz permits precise speed adjustments across the operating range. The drive produces 160% torque for 60 seconds at startup and supports 110% torque for 0.5 seconds during a short overload. Torque rise occurs within 1 ms under Flux control or within 10 ms in VVC+ mode. A displacement factor greater than 0.98 and a true power factor of at least 0.9 support efficient use of the incoming supply. The control terminals accept up to 28 V DC, while the Safe Torque Off circuit draws 50 mA RMS at 24 V.
The drive permits continuous operation at full output current in ambient temperatures up to 45 °C, supporting installation in standard control cabinets. It also maintains its rated output at elevations up to 1000 m without derating. Its IE2 energy-efficiency class helps limit conduction losses when several drives operate within the same panel. Adequate cabinet ventilation and installation clearances are still necessary to move heat away from the inverter during sustained operation. The FC 301 platform uses a consistent parameter structure and mechanical format across compatible units, which supports uniform control configurations in automated machinery.
