Product Description:

The FC-301P1K5T4Z20H3TGXXXXSXXXXALBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It accepts three-phase industrial power and delivers a modulated output to adjust motor speed in automated material-handling, pumping, and ventilation tasks. By varying output frequency and voltage, the drive allows a connected motor to match process demand instead of running continuously at full speed. Its 301 series designation places it in a compact mechanical frame that helps conserve enclosure space while meeting factory control requirements.

It delivers 1.5 kW, which corresponds to 2.0 HP of continuous output power. The input accepts 380–480 VAC three-phase power, permitting direct connection to plant feeders. With an IP20 enclosure rating, the unit requires cabinet installation but blocks fingers and large debris. The boards are uncoated, so ambient humidity must remain moderate during operation. Standard cable entries serve both control and motor conductors, and cooling depends on free airflow across the heat sink. No mains option is installed, so external protection devices are required. That arrangement supports use in protected control cabinets where airflow paths remain clear around the power section.

Slot A is populated with the PROFINET MCA 120 interface, enabling real-time network control and diagnostic feedback to higher-level PLCs. Functional safety is delivered through the built-in Safe Stop circuit, which removes torque on demand without mechanical contactors. Radio-frequency interference is reduced by the factory-installed Integrated EMC filter when shielded motor leads are used. Day-to-day parameter access is provided by a Graphical Local Control Panel, whose high-contrast screen supports local setup and fault tracing. This combination allows centralized control over the network while still keeping routine adjustments available at the drive.