FC-301P1K5T4134L2982 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K5T4134L2982 is part of the VLT FC 301 Automation Drives series and supports a mains voltage of 380 to 480 VAC with three phase power. It has a power rating of 1.5 kW, an efficiency of 97 percent at rated current, and offers a maximum output frequency of 590 Hz. The drive delivers 2 HP and features rated output currents of 4.1 A at 380-440 V and 3.4 A at 441-500 V.
Internal Product Review
The FC-301P1K5T4134L2982 is a Danfoss VLT FC 301 automation drive rated at 1.5 kW for 380 to 480 VAC three-phase power. The 97% efficiency and 590 Hz maximum output frequency make the drive a strong choice for precise, energy-conscious motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T4134L2982 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. Within an automation cell, it converts fixed three-phase mains power into a regulated output that allows a PLC to match motor speed to changing process demand. This control supports applications such as conveyors, pumps, fans, and production equipment that require adjustable motor speed or torque. Its auxiliary 24 V DC terminal can supply up to 200 mA to field sensors, relays, or other compatible low-power devices.
This model delivers a mechanical output of 1.5 kW, which corresponds to 2.0 HP, while drawing a maximum apparent power of 2.8 kVA from the line. Energy consumption is reduced by an efficiency of 97% at rated current. The input accepts 380–480 VAC three-phase power and requires 3.7 A when operated from 380 to 440 V. Within that voltage range, the inverter can supply 4.1 A to the connected motor, while the available output current falls to 3.4 A when the mains voltage is between 441 and 500 V. A flux-oriented control algorithm operates at frequencies up to 300 Hz to improve torque production at low motor speeds. Shielded motor cables can extend up to 50 m, whereas unshielded cables can extend up to 75 m before additional output filters are needed.
Speed commands are supported up to 590 Hz in standard mode, providing a broad output range for compatible high-speed motors. Carrier modulation can be raised to 110 kHz for machinery that is sensitive to acoustic noise or torque ripple. Power loss is limited to 62 W at rated load, helping control enclosure temperature without requiring forced cooling. An overvoltage alarm activates when the intermediate circuit reaches 820 V DC, protecting the drive from excessive DC-bus voltage. The drive can be energized twice per minute, which limits repeated inrush current on lightly protected supply feeders while permitting normal startup and service procedures.
