FC-301P1K5T4131B9059 FC301P1K5T4131B9059 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K5T4131B9059 FC301P1K5T4131B9059 is part of the VLT FC 301 Automation Drives series, with a 1.5 kW power rating and operating on three phase power at 380 to 480 VAC. This drive offers a continuous output current of 4.1 A, supports a maximum output frequency of 590 Hz, and has an efficiency of 0.97 at rated current.
Internal Product Review
The FC-301P1K5T4131B9059 FC301P1K5T4131B9059 is a Danfoss VLT FC 301 automation drive rated at 1.5 kW for 380-480 VAC operation. Efficiency at rated current of 0.97 and a maximum output frequency of 590 Hz support precise motor control with low operating loss. Strong electrical performance makes the drive a dependable choice for demanding automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T4131B9059 FC301P1K5T4131B9059 is a Danfoss variable frequency drive in the VLT FC 301 Automation Drives series. It modulates the voltage and frequency of a three-phase power supply to regulate the speed of industrial induction motors. This control allows motor torque and speed to follow changing process demands while supporting compact cabinet layouts. The drive operates on three-phase power, draws 3.7 A from the power supply, and provides a motor output of 2.0 HP for pumps, fans, conveyors, and material-handling equipment.
The inverter has a rated motor power of 1.5 kW, making it suitable for smaller industrial machines that require adjustable speed. It accepts an input range of 380 to 480 VAC, allowing direct connection to common plant power networks without an autotransformer. The DC link and IGBT bridge support a continuous apparent power of 2.8 kVA. Its efficiency is 0.97 at rated current, so only a small portion of the supplied energy is converted into heat. Power loss is limited to 62 W under nominal load, helping keep enclosure temperatures manageable. This thermal performance reduces the airflow needed to remove heat from the cabinet during continuous operation.
The output section supplies a continuous line current of 4.1 A and supports carrier switching frequencies up to 110 kHz to reduce audible motor noise. Frequency commands extend to 590 Hz in standard vector control, while flux mode limits the frequency to 300 Hz for constant-torque motors. Shielded motor cables may reach 50 m, while unshielded cables may extend to 75 m without exceeding the permitted drive-to-motor cable limits. Operation at altitudes up to 1000 m does not require current derating, and full current remains available at ambient temperatures up to 45 °C. The digital input terminals tolerate up to 28 V DC. The Safe Torque Off gate draws 50 mA from a 24 V source during operation.
