FC-301P1K5T2134L2898 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P1K5T2134L2898 is part of the VLT FC 301 Automation Drives series and has a power rating of 1.5 kW with a rated output current of 7.5 Amps. This three-phase drive supports a mains voltage range of 200 to 240 VAC and offers one analog output with a 12-bit resolution. It uses the VVC+ control principle and features two digital outputs, with a maximum output frequency of 32 kHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T2134L2898 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. In industrial automation, the unit converts fixed-frequency mains power into a modulated voltage sequence. This conversion allows closed-loop speed and torque regulation of standard induction motors used on conveyors, pumps, and fans. The drive can adapt motor operation to changing process demands while maintaining controlled acceleration and deceleration.
This model supplies 1.5 kW of mechanical output, which corresponds to 2.0 HP when an IEC motor is attached. It draws power from a 200 to 240 VAC three-phase circuit and can deliver up to 7.5 A of current to the motor terminals. The inverter’s switching section supports carrier frequencies as high as 32 kHz, enabling quiet motor operation and fine torque resolution. Internally, the VVC+ control principle adjusts pulse patterns in real time to maintain stable flux under dynamic load changes. One 12-bit analog output spans 0/4–20 mA for process feedback, while two digital outputs provide relay-free signaling to external controllers. A brake chopper engages the 365 V DC link when commanded. The unit issues a high-voltage warning at 405 V DC, allowing preventive action before the overvoltage alarm threshold of 410 V DC is reached.
Cabling allowances include a maximum shielded motor lead of 50 m and a maximum unshielded motor lead of 75 m. These cable-length limits help prevent excessive capacitive loading on the output stage. Power conductors up to 4 mm² can be terminated inside the clamp set, matching the drive’s thermal and current requirements. The drive operates only with three-phase power, consistent with its input circuit. Its analog and digital interfaces support communication with external process controls, while the brake chopper manages regenerated energy during motor deceleration. The available cable connections support installation in distributed control panels and compact machine enclosures.
