FC-301P1K5T2134L2626 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P1K5T2134L2626 is part of the VLT FC 301 Automation Drives series and features a power rating of 1.5 kW with a maximum output frequency of 590 Hz. This three phase drive provides a continuous output current of 7.5 A and operates at an efficiency of 96 percent. Its analog output resolution is 12 bit, and it provides a 24 V output with a maximum load of 200 mA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T2134L2626 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. Within an automation cell, it converts fixed-frequency three-phase line power into a modulated output that allows controllers to regulate induction motor speed and torque for conveyors, pumps, or fans. The drive supplies 24 V control power, field I/O, and relay signaling, allowing it to connect higher-level PLCs with the motor circuit. Its integrated control connections support common automation signals without requiring separate interface hardware for basic operation.
The drive is rated for a mechanical output of 1.5 kW and accepts a nominal three-phase input of 200–240 VAC. It draws 6.8 A of continuous line current and presents an apparent power demand of 2.70 kVA at 208 V. Conversion efficiency reaches 96%, limiting waste heat while the adjustable output frequency ranges from zero to 590 Hz. For vector applications, a dedicated 300 Hz flux-mode ceiling supports high-speed field weakening. The analog output operates with 12-bit resolution, providing fine adjustment across its available signal range. Digital feedback is available at 40 mA, and the 24 V terminal can supply 200 mA to external sensors. These control connections allow reference and feedback signals to be exchanged directly with compatible automation equipment.
During normal operation, the inverter supplies a continuous motor phase current of 7.5 A. It tolerates transient motor current up to 8.3 A during a 60-second overload cycle, while the input current can briefly rise to 7.5 A without causing a protective trip. At 230 V, the apparent power draw can reach 2.99 kVA. Internal power dissipation is limited to 82 W, helping keep cabinet ventilation requirements moderate. One form-C relay output provides a dry-contact status signal for external control circuits. The drive also includes one digital sink output for connection to compatible input devices. Its Series Identifier is 301, which indicates its placement within the FC 301 product line.
