FC-301P1K5T2131X7262 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K5T2131X7262 is part of the VLT FC 301 Automation Drives series and has a power rating of 1.5 kW with 2.0 horsepower. This drive supports a mains voltage of 200 to 240 VAC three phase power and operates with a maximum input current of 6.8 amps. It features a maximum output frequency of 590 Hz and an efficiency of 0.96.
Internal Product Review
The FC-301P1K5T2131X7262 is a Danfoss VLT FC 301 automation drive with a 1.5 kW power rating and 200 to 240 VAC mains voltage. Three-phase input and 0.96 efficiency support smooth, energy-conscious performance in demanding drive applications. A maximum output frequency of 590 Hz stands out as a strong advantage for flexible speed control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T2131X7262 variable frequency drive is produced by Danfoss within the VLT FC 301 Automation Drives series. Carrying the series identifier 301 within the VLT AutomationDrive FC product group, it modulates three-phase 200–240 VAC mains power to supply speed-regulated power to induction motors. The unit is installed in conveyor, fan, and pump stations where closed-loop torque control improves energy use and maintains precise flow or movement under changing process demands. Compact dimensions allow cabinet mounting beside PLC I/O modules, and the integrated control terminals accept standard field wiring for connections to other automation equipment.
Operating on 200–240 VAC mains, the drive delivers a continuous mechanical output of 1.5 kW, equivalent to 2.0 HP. At this rating, it provides a motor current of 7.5 A while drawing a maximum line current of 6.8 A; the difference results from the internal DC link and switching topology. The upstream circuit must accommodate an apparent power of 2.99 kVA to avoid nuisance trips. Power conversion losses amount to 82 W, so forced ventilation of the enclosure is normally sufficient. The three-phase architecture keeps phase loading symmetrical, and the control inputs are protected by a 28 VDC ceiling on the digital terminals. During rapid deceleration, the brake chopper activates at 365 VDC to absorb regenerated energy and maintain DC-bus stability.
With an efficiency of 0.96, the inverter converts most of its absorbed energy into usable shaft power. It can generate output frequencies up to 590 Hz for high-speed spindles, while a dedicated flux mode is capped at 300 Hz to optimize magnetization. Incoming supply frequencies of 50/60 Hz ±5% are accepted, and the power stage tolerates mains fluctuations of ±10% before derating is considered. Protective logic raises a high-voltage warning at 405 VDC and triggers an overvoltage alarm at 410 VDC, helping prevent damage to the IGBT bridge. The three-phase topology distributes the electrical load across the incoming supply phases during operation.
