FC-301P1K5T2131B1124 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K5T2131B1124 is part of the VLT FC 301 Automation Drives series and has a power rating of 1.5 kW with a horsepower of 2.0 HP. It operates on three phase power at 200 to 240 VAC and has a continuous output current of 7.5 A. This drive features 1 analog output, 2 digital outputs, and a maximum output frequency of 590 Hz.
Internal Product Review
The FC-301P1K5T2131B1124 is a Danfoss VLT FC 301 automation drive rated for 1.5 kW and 2.0 HP. Three-phase operation on 200 - 240 VAC gives the drive solid flexibility for standard industrial motor control. Efficiency at rated current of 0.96 supports low-loss performance, making this model a strong choice for dependable automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K5T2131B1124 is a variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. It converts three-phase mains power into a modulated output that allows controllers to regulate induction motor speed in pumps, fans, and conveyor modules. By varying the output frequency, the unit coordinates torque with process demand, supporting compact machine panels where precise speed control and reduced mechanical stress are required.
The drive operates from a three-phase mains input of 200–240 VAC and delivers up to 1.5 kW of mechanical power. At rated load, it can supply a continuous output current of 7.5 A while drawing 6.8 A from the line. Its efficiency reaches 0.96, so most of the input energy is transferred to the motor instead of being dissipated as heat. The programmable output frequency reaches 590 Hz for high-speed applications, while flux-mode operation has a separate ceiling of 300 Hz for field-oriented control. One analog output and two digital outputs provide status or process feedback to external PLCs. These connections allow the drive to communicate operating conditions without requiring separate signal conversion equipment.
Apparent power is rated at 2.99 kVA at 230 V, and electrical losses are limited to 82 W, easing cabinet cooling requirements. A shielded motor cable up to 50 m long can be used without exceeding drive-side electromagnetic compatibility limits. The true power factor remains at ≥0.9 to minimize reactive current draw from the supply. The control electronics include a 10 VDC reference rated at 15 mA and a 24 VDC source capable of supplying 200 mA to sensors or switches. The built-in relay handles 240 VAC at 2 A under AC-1 duty, permitting direct connection to contactors or alarm beacons. This relay provides a convenient switching point for external indication or control devices connected to the drive.
