FC-301P1K1T4131X7306
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-301P1K1T4131X7306 frequency drive boasts an automatic operation mode, an intermittent current of 9 A, a shaft power rating of 2.2 kW, and a surface cooling system. Part of the VLT AutomationDrive FC 301 series manufactured by Danfoss, it features several enclosure variations and a digital display control interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss International’s FC-301P1K1T4131X7306 is a superb frequency converter manufactured and commercialized under the powerful VLT automation line. With a T4 mains voltage designation, this frequency converter operates at a voltage range of 380 to 480 volts, plus or minus 10%. Equipped with an A1 enclosure, this variable adjustment converter has a protection rating of IP 20 and comes with an integrated EMI filter. At high-overload operation, the converter achieves a nominal shaft output of 1.1 kilowatts or 1.5 horsepower. To support this shaft output, the converter draws a continuous input current of 3.1 to 3.7 amperes, depending on the mains voltage.
At the recommended maximum load, the FC-301P1K1T4131X7306 dissipates a total power of 58 watts in the form of heat. Considering this power loss, the converter achieves an overall efficiency of 96%. For Danfoss’ FC-301 converters with an A1 enclosure, the recommended cable cross-section for the mains, motor, brake, and load sharing wiring is 3 x 4 square millimeters. Like other FC converters by Danfoss with a 301 drive, the FC-301P1K1T4131X7306 can tolerate a 3% phase voltage imbalance during operation and a supply frequency deviation of 5%. At the converter’s rated load, the true power factor can reach a value of more than 0.9 or 90%.
The FC-301P1K1T4131X7306’s motor output has a frequency range of 0 to 590 hertz. At this frequency range, the motor output voltage can take any value between 0 and 100% of the supply. For FC-301 converters such as the FC-301P1K1T4131X7306, the motor cable length must not be longer than 50 meters for shielded types or 75 meters for unshielded types. All in all, the FC-301P1K1T4131X7306 supports up to two analog inputs and six digital inputs.
Frequently Asked Questions about FC-301P1K1T4131X7306:
Q: What is the maximum recommended fuse size for the FC-301P1K1T4131X7306?
A: The maximum recommended fuse size for the FC-301P1K1T4131X7306 is gG-25 with a maximum trip level of 25 A.
Q: What is the torque control accuracy of the FC-301P1K1T4131X7306?
A: The FC-301P1K1T4131X7306 has a minimum torque control accuracy of 95% of the rated torque.
Q: What is the speed accuracy of the FC-301P1K1T4131X7306 in open-loop configuration?
A: In open-loop configuration, the FC-301P1K1T4131X7306 has a speed accuracy of plus or minus 8 RPM within the range of 30 to 4000 RPM.
Q: What type of USB does the FC-301P1K1T4131X7306’s control card support?
A: The FC-301P1K1T4131X7306’s control card supports a USB type B plug with 1.1 full speed.
Q: What terminal of the FC-301P1K1T4131X7306 is designed for the motor output?
A: As an analog output, the motor must be connected to terminal 42, which corresponds to the single analog output of the FC-301P1K1T4131X7306.
