FC-301P1K1T2134L2933 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K1T2134L2933 is part of the VLT FC 301 Automation Drives series and features a power rating of 1.1 kW with a horse power of 1.5 HP. It operates on three phase power with a mains voltage of 200 to 240 VAC and delivers a continuous output current of 6.6 A. The drive supports up to 2 digital or pulse outputs and allows a maximum output frequency of 590 Hz.
Internal Product Review
The FC-301P1K1T2134L2933 is a Danfoss VLT FC 301 automation drive built for 200-240 VAC three-phase power. Continuous input current of 5.9 A and continuous output current of 6.6 A support steady motor control in demanding automation service. The 0.96 efficiency rating makes the unit a strong choice for energy-conscious drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss manufactures the FC-301P1K1T2134L2933 as part of the VLT FC 301 Automation Drives series. This AC variable frequency drive modulates three-phase 200–240 VAC mains power to control induction motors in automated equipment. By regulating speed and torque electronically, the unit supports conveyors, pumps, and general motion tasks without mechanical throttling.
The drive is rated for continuous mechanical power of 1.1 kW, which equates to 1.5 HP. On the supply side, it draws 5.9 A of three-phase current, while the inverter section can sustain 6.6 A at the motor terminals; these values guide circuit breaker sizing and motor selection. Conversion efficiency reaches 0.96 at rated current, so only 4% of input energy becomes heat, easing cabinet ventilation. For applications requiring a wide speed range, the output frequency can be adjusted up to 590 Hz, and a separate 300 Hz flux-mode ceiling supports vector control when additional motor magnetization is required. Two digital outputs provide status signaling to the host PLC, and a maximum switching frequency of 32 kHz helps reduce audible motor noise.
At full load, the rectifier presents an apparent power demand of 2.63 kVA to the 230 V supply, a value used when calculating transformer capacity and harmonic filters. Internal DC bus supervision raises an alarm at 410 V DC, helping protect the IGBTs during input surges or regenerative events. The thermal design dissipates only 63 W at rated load, which simplifies passive cooling and allows the drive to share compact panels with sensitive controls. Process feedback is available through an analog output that can be scaled between 0/4–20 mA for proportional valve actuation or remote metering. The terminal block supports shielded motor cables up to 50 m long or unshielded motor cables up to 75 m long, providing installation flexibility across small cells and extended conveyor lines.
