FC-301P1K1T2131X7293 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-301P1K1T2131X7293 is part of the VLT FC 301 Automation Drives series and operates on three phase power at a mains voltage of 200 to 240 VAC. It has a power rating of 1.1 kW with a continuous output current of 6.6 A and achieves an efficiency of 0.96 at rated current. This drive supports a maximum output frequency of 590 Hz and has a horsepower of 1.5 HP.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K1T2131X7293 variable frequency drive is manufactured by Danfoss for the VLT FC 301 Automation Drives series and has the internal series identifier 301. It belongs to the broader VLT AutomationDrive FC product group and is intended to modulate three-phase 200–240 VAC motors so that conveyor sections, pumps, or small machine spindles can follow process speed commands rather than operate at a fixed utility frequency. Using pulse-width modulation, the unit converts utility power into a programmable waveform, reducing energy use and mechanical stress in automated equipment.
At 230 V, the drive has an apparent power rating of 2.63 kVA. The input side draws a continuous current of 5.9 A, while the inverter can supply 6.6 A to the motor terminals; these values correspond to its nominal motor output of 1.1 kW. Electrical efficiency reaches 0.96 at rated current, so only four percent of the incoming energy becomes heat under a steady load. The utility connection tolerates a phase imbalance of 3.0 percent, and the drive can be powered up twice per minute without exceeding its permitted cycling rate. The carrier frequency is selectable up to 32 kHz, enabling quiet motor operation, and the maximum programmable output frequency is 590 Hz.
The control terminals have a digital input resistance of 4 kΩ and accept logic levels up to 28 V DC; the built-in transistor outputs can provide up to 40 mA for relays or indicator circuits. The pulse capture hardware accepts feedback frequencies up to 110 kHz, enabling accurate speed supervision with incremental encoders. For motor wiring, the drive supports shielded cable runs of up to 50 m and unshielded cable runs of up to 75 m, helping maintain electromagnetic compatibility in compact panels. Thermal management is aided by a full-load power dissipation of only 63 W, so standard cabinet ventilation is usually sufficient.
