FC-301P1K1T2131G4515 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K1T2131G4515 is part of the VLT FC 301 Automation Drives series and features a power rating of 1.1 kW and operates on three phase power at a supply voltage of 200 to 240 VAC. It delivers a horse power of 1.5 HP and supports output frequencies from 0 to 590 Hz, with output voltages up to 100 percent of supply. The unit also provides analog output in the 0/4–20 mA range and digital input voltage from 0–24 V DC.
Internal Product Review
The FC-301P1K1T2131G4515 is a Danfoss VLT FC 301 automation drive rated at 1.1 kW for 200–240 VAC operation. Three-phase power and a 0–590 Hz output frequency give this unit excellent range for precise motor control in automation service. A displacement factor above 0.98 makes this drive an efficient and well-balanced choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K1T2131G4515 is an AC variable-frequency drive manufactured by Danfoss. It belongs to the VLT FC 301 Automation Drives series and uses the internal series identifier 301. Within industrial automation, the unit modulates three-phase mains power to regulate induction motor speed, torque, and energy use across conveyors, pumps, and general material-handling equipment. Its compact design supports installation in pump stations, HVAC panels, and distributed machine-control enclosures where adjustable motor operation is required.
The control board provides an analog output range of 0/4–20 mA for process feedback, while command states are accepted through digital inputs rated at 0–24 V DC. Status relay outputs can switch loads up to 40 mA, which is sufficient for typical PLC sensing circuits. Electrical efficiency is supported by a displacement factor above 0.98. The vector algorithm maintains flux regulation across a frequency range of 0–300 Hz in flux mode. The true power factor is at least 0.9, and the drive tolerates a mains imbalance of 3 percent, allowing operation on imperfect power feeds. The supported supply frequency is 50 or 60 Hz with a tolerance of ±5 percent. Output voltage is adjustable from zero to 100 percent of the supply voltage, allowing the drive to soft-start the motor or operate it at full field. These control ranges support both basic speed commands and process feedback signals without requiring separate conversion modules.
Mechanical shaft output is rated at 1.5 HP, and the output current can reach 6.6 A when the drive is connected to a 200–240 VAC three-phase supply. The inverter supports fundamental output frequencies of up to 0–590 Hz for high-speed spindles and gearless applications. A shielded motor cable can extend up to 50 meters, while an unshielded cable can extend up to 75 meters without exceeding the drive’s switching limits. Sensorless vector control helps the drive maintain rated torque while responding to changes in motor load. The adjustable output and broad frequency capability allow the controller to operate standard induction motors across low-speed process duties and higher-speed machine applications.
