FC-301P1K1T2131B1108 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P1K1T2131B1108 is part of the VLT FC 301 Automation Drives series and features a power rating of 1.1 kW with a 1.5 HP output. This three phase drive operates with a mains voltage range of 200 to 240 VAC and has an efficiency of 0.96 at rated output. It supports a maximum output frequency of 590 Hz and provides a continuous output current of 6.6 A.
Internal Product Review
The FC-301P1K1T2131B1108 is a Danfoss VLT FC 301 automation drive rated at 1.1 kW for 200-240 VAC service. Efficiency at rated output of 0.96 and a displacement power factor above 0.98 support clean, economical operation in well-tuned motion and process systems. A 590 Hz maximum output frequency stands out as a strong performance point for demanding variable-speed applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P1K1T2131B1108 is an AC variable-frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. In industrial automation, it regulates induction motor speed so conveyors, pumps, or fans can match process demand rather than run at a fixed line frequency. The unit carries the internal series identifier 301, linking it to shared mechanical dimensions and fieldbus options across the platform.
The drive accepts a three-phase supply of 200 to 240 VAC and provides continuous apparent power of 2.63 kVA at 230 V. Under that input, the rectifier draws 5.9 A, while the inverter can deliver 6.6 A to the motor terminals. Its motor output is rated at 1.1 kW, and the displacement power factor remains above 0.98, so line current stays nearly in phase with voltage. The true power factor is at least 0.9, helping limit the effect of harmonics on upstream protection equipment. Rated efficiency reaches 0.96, keeping power loss to 63 W during full-load operation and limiting heat buildup in the cabinet. An overvoltage alarm activates when the intermediate circuit reaches 410 V DC, protecting the IGBTs from regenerated energy during rapid deceleration.
The control board tolerates digital input levels up to 28 V DC and can source 40 mA through each digital output for relay coils or indicator lamps. The maximum output frequency is 590 Hz, while flux mode has a 300 Hz limit for applications that prioritize constant torque. The drive supports no more than two power-ups per minute to avoid stress caused by repeated inrush current. Motor nameplates rated at 1.5 HP align with the drive’s electrical output. Front-panel LEDs indicate run status, trips, and reset conditions, providing direct visual information during operation. Three-phase power sequencing helps maintain balanced loading on plant transformers.
