FC-301P18KT2134L2708 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P18KT2134L2708 is part of the VLT FC 301 Automation Drives series and features a power rating of 18.5 KW and 25 HP. It supports three phase power with a mains voltage range of 200 to 240 VAC and an output frequency of 0 to 590 Hz. The drive offers two digital outputs, an analog output range of 0/4 to 20 mA, and supports shielded motor cables up to 50 meters long.
Internal Product Review
The FC-301P18KT2134L2708 is a Danfoss VLT FC 301 automation drive designed for three-phase power at 18.5 kW. Output frequency up to 590 Hz and a true power factor of ≥0.9 give the drive efficient, responsive performance in demanding automation service. Unshielded motor cable capability to 75 m makes the unit a strong choice for flexible installation layouts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P18KT2134L2708 is a variable-frequency drive manufactured by Danfoss as part of the VLT FC 301 Automation Drives series. It accepts industrial input power and synthesizes a modulated output that allows controllers to vary induction motor speed directly from the inverter. This capability eliminates the need for mechanical throttling, reduces energy use, and maintains stable torque in material-handling, pumping, and fan applications throughout automated plants.
This model delivers a continuous power output of 18.5 kW, which corresponds to 25 HP. It connects to a mains supply rated at 200–240 VAC and is designed for three-phase power systems commonly found in low-voltage distribution panels. The inverter provides an output frequency range of 0–590 Hz by adjusting its waveform, allowing it to accommodate processes with broad speed requirements. Flux-mode operation provides usable torque from 0 Hz through 300 Hz. The output voltage varies linearly from 0% to 100% of the incoming voltage, which helps protect motor insulation during modulation.
The control stage provides an analog feedback loop of 0/4 to 20 mA for proportional signals and supports two digital status outputs for connections to PLC input cards. A high-resolution switching pattern is available over a carrier frequency range of 0–110 kHz, allowing finer acoustic and harmonic adjustment. Line synchronization supports a supply frequency of 50/60 Hz ±5%. The DC bus can be powered from 0–24 V, with a maximum of 28 V for safe-stop functions. Power quality is supported by a displacement factor of >0.98, while the true power factor remains at or above 0.9 under nominal load. Shielded motor cables may extend up to 50 m, while unshielded cables may extend up to 75 m, allowing flexible cabinet placement without additional output reactors.
