FC-301P15KT4131B3675 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P15KT4131B3675 is part of the VLT FC 301 Automation Drives series and has a power rating of 15 kW or 20 horsepower. It operates with a mains voltage of 380 to 480 VAC on three phase power, and supports an output frequency range of 0 to 590 Hz. The drive features a 12-bit analog output with a range of 0 or 4 to 20 mA, two digital outputs, and supports shielded and unshielded motor cables up to 50 and 75 meters respectively.
Internal Product Review
The FC-301P15KT4131B3675 is a Danfoss VLT FC 301 automation drive designed for three-phase power at 380-480 VAC. The 15 kW rating and 20 HP capacity give the drive a confident operating range for industrial motor control. Output frequency up to 590 Hz stands out as a key advantage for flexible automation performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P15KT4131B3675 is an AC drive manufactured by Danfoss for the VLT FC 301 Automation Drives series. It converts fixed-frequency three-phase power into variable-frequency output, allowing control systems to regulate induction-motor speed in conveyors, pumps, and other automated equipment. The drive supports flux-vector control at output frequencies up to 300 Hz, providing a broad operating range for automated machinery. Its control architecture also supports V/f operation for applications that do not require the dynamic response of flux-vector control.
This model delivers a continuous motor output of 15 kW, equivalent to 20 HP. It operates from 380–480 VAC three-phase mains at 50 or 60 Hz with a frequency tolerance of ±5%. Motor voltage can be adjusted from 0% to 100% of the available line voltage, allowing the output to match motor operating requirements. The drive places no cycle limit on output switching, although power-up is limited to once per minute to protect the inrush components. Process feedback is handled by a single analog channel that sources or sinks 0/4–20 mA with a resolution of 12-bit. Two programmable digital outputs provide configurable run or alarm signals to connected control equipment.
Application wiring supports a shielded motor cable with a maximum length of 50 m, while an unshielded cable can extend up to 75 m. Frequency commands are accepted across a range of 0–590 Hz, allowing the drive to operate high-speed motors and spindles where the connected equipment supports those speeds. The three-phase line supply must maintain a maximum voltage imbalance of 3.0% to limit stress on the DC link. At nominal load, the installation maintains a true displacement power factor of at least 0.9. Cable selection, grounding, and shielding should follow the installation requirements for the connected motor and control system to preserve signal quality and stable operation.
