FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX is a high overload automation drive with a rated output current of 2.1 A continuous at 525–550 V. Manufactured by Danfoss and part of the VLT FC 301 Automation Drives series, it operates at a voltage range of 3x525–690 V AC. The unit features IP21 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX is a high overload drive with applications that call for stability and high performance. It has an output current of 2.1 A continuously operating in the range of 525 to 550 volts, and 1.6 A operating in the range of 551 to 690 volts. This makes it operate with equal reliability over a broad voltage range. Transients current overload goes up to 3.4 A from voltages of 525 to 550 and 2.6 A in the range of voltages 551 to 690 and thus ideal in applications wherein high demands of higher short-duration currents are to be met.
The highest input current is realized at 1.9 A for continuous operating in the range of voltages 525 to 550 and at 1.4 A under 575 volt. It possesses an intermittent overload rating of 160% for ratings from 1.1 to 30 kilowatts and 150% for ratings of over 30 kilowatts, both within a ten-minute cycle time of one minute. Nominal shaft output power is 1.5 horsepower for 575 volts and 1.1 kilowatts for 690 volts, supporting stable drive control during loaded conditions. Having the capability for high overload ratings, the drive is ideal for applications requiring high current capabilities. All three connection cables, brake, mains, and motor, are 4 mm² or 12 AWG cross-section, ensuring uniform installation and power capacity.
The device is designed to provide high performance without overheating, providing protection and continuity to motors under uneven stress. This drive integrates high current ratings, thermal overload protection, and voltage range performance into a rugged and compact control system, ideal for high-performance motor applications demanding performance under pressure. Its electrical and mechanical specification is designed to support demanding operating conditions while providing reliable overload protection and motor control.
Frequently Asked Questions about FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX:
Q: What is the rated output current for the Danfoss VLT FC 301 FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX drive?
A: The rated output current is 2.1 A at 525–550 V and 1.6 A at 551–690 V.
Q: What is the protection rating for the Danfoss VLT FC 301 FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX?
A: The protection rating is IP21/Type 1 for the standard enclosure.
Q: What is the intermittent overload current for the Danfoss VLT FC 301 FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX?
A: The intermittent overload current is 3.4 A at 525–550 V and 2.6 A at 551–690 V.
Q: What is the mains cable cross-section for the Danfoss VLT FC 301 FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX?
A: The mains cable cross-section is 4 mm² (12 AWG).
Q: What is the maximum motor cable length for the Danfoss VLT FC 301 FC-301P11KT4E20H1BGCXXXSXXXXAXBXCXXXXDX?
A: The maximum motor cable length is 4 mm² (12 AWG).
