FC-301P11KT2134L2631 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P11KT2134L2631 is a 15 HP automation drive from the VLT FC 301 Automation Drives series, designed for three-phase 200 to 240 VAC power and has an efficiency of 0.96. It delivers a power rating of 11 kW with a maximum output frequency of 32 kHz and supports one analog output along with two digital outputs. This unit also features a high overload class of 160% and a circuit capability of 100000 A RMS.
Internal Product Review
The FC-301P11KT2134L2631 is a Danfoss VLT FC 301 automation drive rated at 11 kW for 200 to 240 VAC service. High-overload capacity of 160% and 46.2 A output current support confident motor control during demanding load changes. A 32 kHz maximum output frequency makes the unit a strong choice for smooth, efficient drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P11KT2134L2631 is an AC variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. The unit provides closed-loop speed and torque regulation for three-phase induction motors used in conveyors, pumps, and other industrial machinery. It converts fixed mains power into a modulated output waveform that responds to real-time load demand.
Its power section is designed for three-phase operation on 200–240 VAC mains and draws an input current of 42 A under high-overload duty. At that supply level, the apparent power reaches 18.4 kVA, while the drive can deliver up to 46.2 A of output current to the motor terminals. An operating efficiency of 0.96 minimizes heat loss, and the high-overload class permits 160% current during brief acceleration events. Protection thresholds are integrated into the drive: the brake chopper engages at 390 V DC, a high-voltage warning appears at 405 V DC, and an overvoltage alarm occurs at 410 V DC. The power stage tolerates short-circuit currents of 100,000 A RMS, allowing installation on high-capacity feeders when appropriate upstream protection is used. One analog output and two digital outputs provide process feedback to supervisory PLCs. Torque develops quickly because flux control reaches rated torque in 1 ms, while the VVC+ vector algorithm reaches rated torque in 10 ms.
The inverter has a continuous electrical rating of 11 kW, equivalent to 15 HP. Its carrier frequency can reach 32 kHz for low-noise motor excitation. The drive belongs to the VLT AutomationDrive FC product group and carries the internal series identifier 301. Its three-phase topology draws symmetrical current across all supply lines and maintains consistent torque under vector or V/f control. Integrated metering allows supply conditions to be monitored before high-overload operation begins. The available control modes support applications that require either advanced torque response or straightforward speed regulation.
