FC-301P11KT2131X7301 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-301P11KT2131X7301 is part of the VLT FC 301 Automation Drives series and operates with a mains voltage of 200 to 240 VAC on three phase power. This drive has a power rating of 11 kW and 15 horsepower, featuring a true power factor of at least 0.9. It supports a maximum frequency output of 32 kHz and uses VVC+ motor control.
Internal Product Review
The FC-301P11KT2131X7301 is a Danfoss VLT FC 301 automation drive built for three-phase power at 11 kW. VVC+ motor control and a true power factor of at least 0.9 support smooth regulation and efficient electrical performance. A 15 HP capability with 200 - 240 VAC mains input makes this drive an excellent fit for demanding automation panels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-301P11KT2131X7301 is an AC automation drive produced by Danfoss for the VLT FC 301 Automation Drives series. Within the wider VLT AutomationDrive FC product group, it serves as a frequency converter that links the plant power bus to asynchronous motors and allows operators to set the required shaft speed through digital or analog references. The drive helps industrial automation systems reduce energy consumption, soften mechanical starts, and coordinate motor torque with changing load requirements on conveyors, mixers, and pump skids.
It is rated for 11 kW of continuous output and connects to 200–240 VAC mains on a three-phase power network; an imbalance of up to 3.0% between phases is tolerated. If the DC link rises to 405 V DC, a warning bit is set for protective action. System efficiency is supported by a power factor of at least 0.9, which limits reactive current. The digital output can supply 40 mA, while the logic inputs accept 0–28 V DC and have a resistance of 4 kΩ. Relay 1 can switch 2 A at 240 V AC, and the STO channels draw 50 mA RMS at 24 V. The drive permits one power-up per minute. Shielded motor leads may run up to 50 m, while unshielded leads may extend to 75 m without exceeding the stated electromagnetic compatibility limits.
During closed-loop operation, the VVC+ algorithm modulates voltage and frequency to deliver 15 HP to the load. The pulse input registers edges at frequencies up to 110 kHz, while the synthesized speed signal can be retransmitted through the frequency output at 32 kHz. The analog monitor uses 12-bit resolution, providing 4,096 steps for process monitoring. The drive is part of Series 301. Its pulse-counting, relay, and analog functions support motor control and process feedback without requiring separate signal-processing equipment.
