134N6160 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-301P7K5T4E20H1XXXXXXSXXXXAYBXCXXXXDX
The Danfoss 134N6160 is part of the VLT FC 301 Automation Drives series and supports a power rating of 7.5 kW or 10 HP. It operates on three phase 380–480 VAC mains voltage and has an IP20 chassis protection level. The drive comes standard with a Powerlink MCA 123 option and RFI Class A1/B filtering.
Internal Product Review
The Danfoss 134N6160 is a VLT FC 301 automation drive engineered for 7.5 kW output and 380 to 480 VAC operation. Three-phase power input and RFI Class A1/B filtering support clean, dependable performance in industrial drive systems. IP20/chassis protection makes this drive a strong choice for controlled cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134N6160 is a variable frequency drive produced by Danfoss for the VLT FC 301 Automation Drives series. Intended for cabinet installation in general-purpose process equipment, it converts fixed-frequency supply power into a modulated output for controlling three-phase induction motors. This conversion allows a PLC or distributed control system to regulate motor speed and coordinate torque with changing load demands. Variable-speed operation can also reduce unnecessary energy consumption when pumps, conveyors, or HVAC fans operate below their maximum capacity. The drive is suitable for applications that require accurate motor control within a compact industrial control enclosure.
The drive accepts an input voltage range of 380–480 VAC from a three-phase power network, making it compatible with common industrial mains supplies without an autotransformer. Its inverter provides a continuous output rating of 7.5 kW, which corresponds to 10 HP. This power range supports small to midsize motors used in material-handling systems, building utilities, and process machinery. Heat dissipation and wiring clearances follow normal cabinet-mounting requirements for A, B, and C frames, allowing the unit to be installed near appropriately spaced contactors and circuit breakers. An integrated RFI Class A1/B filter reduces conducted electromagnetic emissions from the switching power stage. Proper grounding, shielded motor cables, and the required installation practices remain important for maintaining electromagnetic compatibility.
The optional communication slot contains a Powerlink MCA 123 module, which provides deterministic Ethernet communication with higher-level controllers. No adaptation module is installed in slot B, and the remaining C0, C1, and D option positions are empty. Conductors enter through standard cable entries, supporting conventional routing of mains, motor, and control wiring inside the cabinet. The drive has uncoated control boards, so it should be housed in a clean, dry enclosure that protects its electronics from condensation, conductive dust, and corrosive airborne contaminants. Its IP20 chassis enclosure prevents accidental finger contact with hazardous internal components but does not protect against water. The unit does not include a brake chopper, so applications that require dynamic braking must use an appropriate external arrangement. An LCP keypad, a dedicated mains switch, and a separate mains input option are also not included.
