131Z5864
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-301P1K5T4Z20H3TGXXXXSXXXXALBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 131Z5864 is a three-phase VLT FC 301 Automation Drive with a rated current of 3.7 A and an output power of 1.5 kW. Manufactured by Danfoss, this drive belongs to the VLT FC 301 Automation Drives series and features an enclosure of IP20 with a PROFINET MCA 120 option bus. It includes a graphical local control panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss’ 131Z5864 is a handy automation device optimized for various types of industrial systems and machinery. Derived from the popular FC-301 product series, this electrical module boasts an output power rating of 1.5 kilowatts at nominal voltage. Like other T4 frequency converters, the 131Z5864 is a three-phase drive that requires a nominal mains voltage of 380 to 480 VAC. Without incorporating chassis modifications and other options, the 131Z5864 has a height of 200 millimeters, a width of 75 millimeters, and a depth of 207 millimeters. Considering its dimensions and enclosure construction, this module has a gross weight of 3.18 kilograms.
As part of Danfoss’ FC-301 series, the 131Z5864 has a model code of FC-301P1K5T4Z20H3TGXXXXSXXXXALBXCXXXXDX. At high-overload conditions, this compact servo drive can incur a total power loss of 62 watts. Even with this rated power loss, however, the product can still deliver a full-load efficiency of around 96%. During full-load operation, the drive can draw a maximum input current of 3.7 A continuously. At the same operating condition, the corresponding output current developed across the drive can reach as high as 4.1 A. Unlike other frequency converters by Danfoss, this drive employs an enclosure of A4/A5, which can have a protection rating of either IP 55 or IP 66.
To safely accommodate the continuous and intermittent current of the 131Z5864 during rated operation, the cable cross section for the drive must be at least 4 square millimeters each. On the other hand, the disconnect cables for this servo drive must have the following maximum cable cross sections: 6, 4, and 4 square millimeters. Wake Industrial provides an item warranty alongside the 131Z5864 upon confirmed purchase.
Frequently Asked Questions about 131Z5864:
Q: How many programmable digital inputs are supported by the 131Z5864?
A: The 131Z5864 can support a total of five programmable digital inputs.
Q: How many of the programmable digital inputs can be configured as an output in the 131Z5864?
A: In the 131Z5864, only one digital input, specifically terminal 27, can be configured as a digital output.
Q: What is the logic type supported for the 131Z5864’s digital inputs?
A: The digital inputs of the 131Z5864 can support both PNP and NPN logic.
Q: What is the voltage range of the 131Z5864’s digital inputs?
A: The 131Z5864’s digital inputs can have a voltage between 0 and 24 VDC.
Q: What is the input resistance for each of the 131Z5864’s digital input terminals?
A: The input resistance for each of the 131Z5864’s digital inputs is approximately 4 kilo ohms.
