175N1151

Product Description:

The 175N1151 by Danfoss sits inside the VLT 3000 Variable Speed Drives series and works in spots needing solid voltage control. With a voltage class rated at 380/500 V, this model handles power for medium and larger motors found across different workflows. The input lines take 3 x 380/400/415 V (±10%) and work at 50 or 60 Hz, so it fits into a variety of grids without any fuss. Every enclosure rolls out with IP00/IP21/IP54 as options, which brings choices for sealed setups or where airflow stays open.

Weight for this drive lands at 15 kg, keeping it light enough for mounting into cabinets while still holding its ground during heavy operation cycles. The enclosure can fit wiring setups with a 16 mm² max cable size, and the motor cable length goes up to 300 meters — enough reach to hit further stops out on big process lines. With a max input current of 17 A for quadratic loads and 13 A on constant load, amperage flexibility means no trouble swapping between duty cycles. Power loss rates list 200 W at max load, helping crews watch the heat and plan cabinet fans right.

Ambient temperature ratings give a range from -10°C to +40°C at full tilt, so this drive works in busier shops and cooler production floors the same. Fit and layout run 530 mm by 281 mm by 178 mm, making it a bet for tight electrical rooms where box size can limit options. The screened cable length comes in at 150 m, a decent reach for longer installations with lower interference. Carrying Danfoss reliability, the 175N1151 locks in precise control and keeps routine running steady in conveyors, fans, and specialty machines where voltage shifts pop up.