175L2015
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 175L2015 variable speed drive offers a typical shaft output of 1.5 kW, a rated output current of 3.4 A, an output frequency range of 0.5–500 Hz, and weighs 7.4–8 kg depending on the enclosure type. Part of the VLT 3000 Variable Speed Drives series by Danfoss, it supports motor voltages of 200/220/230 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175L2015 is a futuristic controller designed to meet the motion control requirements of automation systems in various industries all over the world. This unit is one of the many products of Danfoss Automation. It is tested and authorized for use in North America, Asia, and Europe. It requires little to no maintenance throughout its service life and is considered to have one of the lowest costs of ownership. Under standard operation conditions, this product will also maintain an operation efficiency level as high as 96 per cent while consuming only about 29.6 amperes of current. There is a fan installed at the back of this product; this fan operates together with a heatsink to ensure the safe elimination of excess heat from the housing of this product.
As an IP20 device, the 175L2015 is not protected from small foreign solid contamination like dust or metal fillings. Its housing also offers no protection against liquid incursions. For best performance, this product should be installed inside a control cabinet that can provide a minimum protection that meets the IP54 category. The 175L2015 is able to supply connected motors with an output current of about 25 amperes, and the continuous output power of motors connected to this product is about 10 kilovolts amperes.
Electrical cables connecting the 175L2015 to the motor can reach a maximum length of 1000 feet. This long length provides operators with a high degree of flexibility when it comes to determining the installation position of both the controller and the motor it is to be used with. The output voltage provided by this product is between 0 to 100 per cent of the AC line voltage. The maximum permissible humidity level for this product is 95 per cent.
Frequently Asked Questions about 175L2015:
Q: What is the protection classification of the 175L2015?
A: The 175L2015 is an IP20 device. It should be installed inside a control cabinet for additional protection.
Q: Is the 175L2015 provided with an access plate?
A: Yes. An access plate and gasket have been integrated at the bottom of the 175L2015 to make punching holes for the installation easier.
Q: What mounting surface is appropriate for this product?
A: The 175L2015 must be mounted on a flat vertical surface to ensure a proper air flow.
Q: Is the 175L2015 a CE marked device?
A: Yes. Danfoss CE marks the 175L2015 according to the Electro Magnetic Compatibility Directive and Low Voltage Directive.
Q: What is the maximum motor cable length that can be used with this product?
A: The maximum motor cable length approved for the 175L2015 is about 1000 feet.
