175L1017 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
36 Seconds
The Danfoss 175L1017 is part of the VLT 3000 Variable Speed Drives series and features a typical shaft output of 1.1 kW with an efficiency of 96% at full load. This drive supports input voltages of 3 x 440 to 500 V, a maximum output frequency of 500 Hz, and rated output current of 2.6 A. It includes electronic thermal motor protection and handles motor cable lengths up to 300 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 175L1017 is a variable frequency drive produced by Danfoss within the VLT 3000 Variable Speed Drives series. It modulates the voltage and frequency supplied to standard AC motors so conveyor lines, pumps, or fans can run at the speed demanded by the process rather than the fixed speed of the mains supply, improving control and lowering energy use in industrial automation. A shaft output capability of 1.1 kW pairs the drive with IEC motors around 1.5 hp, and a fixed 50/60 Hz supply frequency range lets it operate on grids worldwide.
The drive accepts a three-phase input of 3 x 440/460/500 V so it can be wired directly to common high-voltage plant feeders. When loaded to its nameplate rating, it converts that power with an efficiency of 96%, minimizing waste heat. Motor current delivery is limited to 2.6 A in continuous operation, while a microprocessor sets pulse patterns up to 14 kHz to keep acoustic noise low. Output frequency can be increased to 500 Hz, allowing oversynchronous operation of high-speed spindles, but the controller will not exceed the 100 Hz figure reserved for nominal motor ratings. A line fuse of up to 16 A protects the supply, and electronic thermal sensing shuts the unit down if the motor thermistor indicates overheating. The inverter reproduces the full mains level on its terminals, delivering up to 100% of the supply voltage when required.
Cabling provisions include a maximum conductor size of 2.5 mm², 150 m of shielded motor leads, and 300 m of total unshielded length, so installation can follow long plant cable trays without signal instability. For short overload demands, the output stage withstands 3.4 A for sixty seconds before current foldback occurs. The unit stays within its rated range up to 40 °C ambient without derating, supporting climates typical of indoor machinery rooms.
Frequently Asked Questions about 175L1017:
Q: What is the efficiency of the Danfoss 175L1017 when operating at full load?
A: The 175L1017 drive achieves an efficiency of 96% at full load.
Q: What is the highest output frequency supported by the 175L1017 VLT 3000 drive?
A: The maximum output frequency for this model is 500 Hz.
Q: How long can the motor cable be for the 175L1017 variable speed drive?
A: This drive supports a maximum motor cable length of 300 meters.
Q: What kind of motor protection is provided by the Danfoss 175L1017?
A: Electronic thermal protection with a thermistor is integrated for motor safety.
Q: What is the typical shaft output power of the 175L1017 VLT 3000 drive?
A: The 175L1017 has a typical shaft output of 1.1 kW.
