VACON0020-3L-0038-4 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 135N2704
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
58 Seconds
The VACON0020-3L-0038-4 is part of the VACON 20 Low Voltage Drives series by Danfoss, featuring a nominal input current of 41.7 Amps and an overload current of 57 Amps. This drive supports a 3-phase input, has a motor power rating of 18.5 kW, and uses an IP21/Nema 1 enclosure. It measures 414 mm in height, 165 mm in width, 202 mm in depth, and weighs 11 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-3L-0038-4 is a three-phase variable frequency drive designed by Danfoss for the VACON 20 Low Voltage Drives series. It serves as the interface between the supply network and an AC motor, modulating voltage and frequency so that plant controllers can optimize flow, pressure, or positioning without mechanical throttling. Typical applications include conveyor lines, centrifugal pumps, and fan arrays where tight speed regulation improves efficiency and reduces component wear.
The drive supports a nominal input current of 41.7 A on a three-phase supply and delivers a continuous output of 38 A to the motor terminals. Its short-term overload capability reaches 57 A, providing headroom for acceleration or load surges before current-limiting functions intervene. The inverter supports an 18.5 kW motor, while the output frequency can reach 320 Hz for compatible high-speed equipment. A 40 A time-delay fuse protects the input bus, and braking energy can be dissipated through an external resistor with a minimum resistance of 17 Ω. Both the mains and motor connections use 3 × 10 + 10 mm² copper conductors, providing suitable cable capacity for the drive’s current range. These connections should be routed with adequate separation from control wiring to reduce electrical interference during operation.
Forced ventilation moves 75 m³/h of cooling air through the heat sink, and the enclosure carries an IP21 / NEMA 1 classification suited to clean indoor panels. The chassis stands 414 mm tall, spans 165 mm in width, and measures 202 mm in depth, allowing vertical installation in a suitably sized control cabinet. Adequate clearance around the ventilation path helps maintain consistent airflow across the internal power components. The shipping mass is 11 kg, which supports manageable handling while providing the thermal mass expected of a drive in this power class.
