VACON0020-3L-0016-4+EMC2+QPES+DLDE Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 135N4213
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss VACON0020-3L-0016-4+EMC2+QPES+DLDE is part of the VACON 20 Low Voltage Drives series. It has a rated motor power of 7.5 kW and supports three-phase input. The drive features an IP21/NEMA 1 enclosure class and operates with a nominal input current of 17.1 Amps. Its dimensions are 370 mm in height, 165 mm in width, and 165 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-3L-0016-4+EMC2+QPES+DLDE is a low-voltage AC drive produced by Danfoss within the VACON 20 Low Voltage Drives series. It modulates the mains supply to regulate the speed of three-phase induction motors in conveyors, pumps, and general automation applications. By converting fixed-frequency power into a variable-frequency output, the unit enables precise torque control while maintaining the compact cabinet footprint often required in distributed machine cells.
At a rated motor power of 7.5 kW, the inverter delivers a continuous output current of 16 A to the motor terminals, while its input side draws a nominal 17.1 A from the three-phase supply. Upstream protection is provided by a 25 A fuse, and the drive can tolerate short-term overloads of up to 24 A during heavy acceleration or process peaks. The minimum brake resistance is 28 Ω, which is the lowest resistor value that may be connected across the DC link to dissipate dynamic braking energy. A C2 EMC filter is fitted, allowing conducted emissions to comply with industrial network limits without an external line choke. The input section accepts three phases directly, and motor leads may extend up to 50 m before additional filtering is required to control voltage reflections.
The enclosure measures 165 mm wide, 165 mm deep, and 370 mm high, allowing installation in shallow panels. Its IP21 / NEMA 1 enclosure protects against incidental contact and vertically falling water drops, making the drive suitable for indoor cabinet mounting where basic ingress protection is sufficient. The drive withstands mechanical shocks of up to 15 G during transport. Mains conductors sized 3 × 6 mm² and a dedicated 6 mm² protective ground conductor connect through clamp terminals. This wiring arrangement completes the power circuit while supporting the performance of the integrated EMC filter.
