VACON0020-3L-0005-4 +EMC2+QPES+DLFI Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 136N5436
The Danfoss VACON0020-3L-0005-4 +EMC2+QPES+DLFI is part of the VACON 20 Low Voltage Drives series and weighs 0.7 kg. This drive delivers a motor power of 1.5 kW with a nominal input current of 5.6 A and is designed for three-phase input. It features a frequency resolution of 0.01 Hz and supports a maximum motor cable length of 30 meters.
Internal Product Review
The VACON0020-3L-0005-4 +EMC2+QPES+DLFI is a well-engineered low voltage drive rated for 1.5 kW motor power with 3-phase input. From a controls standpoint, the 0.01 Hz frequency resolution and C2 EMC category support precise speed regulation and clean integration in panel-based systems. A 4.3 A rated output current gives the unit strong utility for compact drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-3L-0005-4 +EMC2+QPES+DLFI variable frequency drive is manufactured by Danfoss within the VACON 20 Low Voltage Drives series. The unit converts fixed three-phase mains power into a modulated output that lets controllers adjust induction motor speed for conveyors, pumps, and general machinery. Its compact MI2 design allows cabinet installation where space is limited, and the model supports the three-phase supplies commonly found in industrial automation panels.
Cooling is handled by an internal fan that moves 10 m³/h of air across the heat sink. Its integrated filter places the device in electromagnetic compatibility class C2, permitting installation on networks with moderate emission limits without external modules. Output frequency can be adjusted in increments of 0.01 Hz, providing precise speed control for vector or V/Hz operation. The drive supports motor cables up to 30 m long when 3×1.5 + 1.5 mm² conductors are used, maintaining voltage integrity between the inverter and motor. The continuous motor output is rated at 1.5 kW, which is the maximum mechanical power available under rated ambient conditions.
The nominal input current is 5.6 A, while a short-term overload capacity of 6.5 A lets the drive handle acceleration peaks without nuisance trips. At the motor terminals, the continuous output current is 4.3 A, matching IEC motors in the 1–2 kW range. Upstream protection is provided by a 10 A fuse. Braking energy can be dissipated through an external resistor with a minimum resistance of 118 Ω when rapid stops are needed. Both mains and motor connections use 3×1.5 + 1.5 mm² wiring, reducing the number of conductor sizes needed for installation. The inverter weighs 0.7 kg, easing DIN-rail or panel mounting and reducing the load on lightweight enclosure doors.
