VACON0020-3L-0004-4-X+DBIR+F0191+SEBK+QDSB+TQLD Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
22 Seconds
The Danfoss VACON0020-3L-0004-4-X+DBIR+F0191+SEBK+QDSB+TQLD is part of the VACON 20 Low Voltage Drives series. It operates with a rated input voltage of 380 to 480 V, input frequency range of 45 to 66 Hz, and supports 3-phase input. The drive has a continuous output current of 3.3 A and a motor power rating of 1.1 kW, with a compact form measuring 195 mm by 90 mm by 102 mm and a weight of 0.7 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-3L-0004-4-X+DBIR+F0191+SEBK+QDSB+TQLD is a low-voltage AC drive manufactured by Danfoss for the VACON 20 Low Voltage Drives series. The device converts fixed-frequency three-phase mains power into a variable output that lets plant controllers regulate motor speed and torque, improving energy use in conveyors, pumps, and compact machinery. Cabinet builders favor this model because the chassis measures only 90 mm wide, 102 mm deep, and 195 mm high, while the integrated brake interface accommodates an external resistor so loads can stop quickly without excessive overshoot.
The drive connects to line supplies of 380–480 V at 45–66 Hz and draws a nominal input current of 4 A when delivering its rated motor output of 1.1 kW. Internally, it processes this energy through IGBT power modules that supply a continuous output current of 3.3 A. The output frequency is adjustable from 0 to 320 Hz, allowing motors to run well below synchronous speed or above their nameplate frequency. Switching frequencies can be selected from 1 to 16 kHz, allowing users to balance acoustic noise against switching losses. An output voltage range of 0 to Uin tracks the selected frequency to maintain the required volts-per-hertz relationship, while a 10 A semiconductor fuse protects the input bus against short-circuit faults. The braking circuit requires a minimum resistor value of 118 Ω to keep transistor temperatures within acceptable limits.
During intermittent overloads, the inverter can supply 5 A for short periods, providing additional torque for acceleration or temporary process disturbances. The enclosure weighs only 0.7 kg, so it can mount directly on a DIN rail without additional support hardware. Adequate vertical and side clearance is required to maintain free airflow across the heat sink fins and prevent neighboring components from obstructing cooling. The shallow profile also leaves room behind the drive for control wiring and helps the unit fit inside compact electrical panels.
