VACON0020-3L-0001-4-R02
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 135U1562
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Danfoss VACON0020-3L-0001-4-R02, part of the VACON 20 Low Voltage Drives series, delivers an output power of 0.5 HP and features a frame size of MI1. This drive operates on 380-480V AC 3-phase input voltage, with an output frequency range of 0-320 Hz. It weighs just 0.55 kg and comes with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
VACON0020-3L-0001-4-R02 is a powerful industrial drive unit. It is produced by Danfoss as part of its VACON 20 series of variable frequency drives. VACON 20 drives are available in a range for output power ratings and enclosure sizes. A wide range of optional features gives operators the flexibility needed to match drive hardware to application requirements. These drives use sensorless vector control. This control method estimates the motor rotor position and speed mathematically using only the motor’s voltage and current measurements. These estimated values are then used to perform vector control, which allows for precise and dynamic torque and speed control, as in servo systems. As this control method does not use real-time feedback, it reduces system cost, increases reliability due to fewer points of failure, and simplifies installation due to a lower number of required cable.
VACON0020-3L-0001-4-R02 is a drive with 380 to 480 Volts AC (three-phase) input. The input frequency range is 45 to 66 Hertz. The drive controls motors by varying its output amplitude and frequency. Amplitude of the voltage output can vary from 0 Volts to the input voltage value. The output frequency can range from a minimum of 0 Hertz to a maximum of 320 Hertz. The rated continuous and peak current output of the VACON0020-3L-0001-4-R02 drive are 1.3 Amps and 2 Amps respectively. The motor shaft power rating is 0.37 kilowatts or 0.5 Horsepower. The mechanical drive size as per Danfoss convention is Ml1. Weight of the drive unit is 0.55 kilograms. The drive can be wall-mounted using screws on mounted on a DIN rail. Approximate height of the drive is 160.1 millimeters, its width is 65.5 millimeters, and its depth is 98.5 millimeters.
Frequently Asked Questions about VACON0020-3L-0001-4-R02:
Q: Can the drive be used with corner grounded networks?
A: Use of VACON 20 drives with corner grounded networks is not permitted.
Q: What is the default switching frequency?
A: The default switching frequency is 4 kilohertz.
Q: What is the switching frequency range?
A: The switching frequency range is 1 to 16 kilohertz.
Q: What is the output voltage range?
A: The output voltage range is from 0 Volts to the input voltage.
Q: Is side by side mounting allowed?
A: Side by side mounting is allowed.
