VACON0020-1L-0003-1-R02 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 135N1261
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
18 Seconds
The Danfoss VACON0020-1L-0003-1-R02 is part of the VACON 20 Low Voltage Drives series and operates on single-phase 115 V input with a nominal input current of 12.4 A. This drive delivers a motor shaft power of 0.55 kW, a continuous output current of 2.8 A, and has an overload current of 4.2 A. It measures 195 mm in height, 90 mm in width, 102 mm in depth, and weighs 0.7 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-1L-0003-1-R02 is a low-voltage AC drive manufactured by Danfoss within the VACON 20 Low Voltage Drives series. This stand-alone inverter regulates the speed of small induction motors in conveyors, pumps, and fans, allowing process equipment to adjust torque without mechanical throttling. By converting fixed-frequency single-phase mains power into a variable-frequency output, the unit provides closed-loop motor control for energy-conscious automation systems.
The drive accepts a single-phase supply at 115 V; this low input voltage allows the unit to receive power from standard utility outlets in light-industrial areas. Under rated conditions, it draws a nominal input current of 12.4 A, and downstream protection uses a 20 A fuse to interrupt faults without nuisance trips. At the output terminals, the inverter delivers a continuous current of 2.8 A, while short-term overload demands of up to 4.2 A are tolerated during acceleration or transient load peaks. The single-phase input architecture simplifies supply wiring while supporting vector modulation of a three-phase motor when required.
The enclosure measures 195 mm in height and 102 mm in depth, so it fits into compact control panels; its mass is only 0.7 kg, easing DIN-rail mounting. To maintain suitable internal temperatures, the heat sink requires airflow of 10 m³/h, which can be provided by a small cabinet fan. Shaft power reaches 0.55 kW, matching fractional-horsepower motors used in auxiliary equipment. The mains connection uses a 2 × 2.5 + 2.5 mm² cable, while the motor connection uses 3 × 1.5 + 1.5 mm² leads to limit voltage drop. A compact frame width of 90 mm allows side-by-side installation while preserving the required cooling clearances.
