VACON0020-1L-0002-2+BM1S+EMC2+QPES+DLFI Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss VACON0020-1L-0002-2+BM1S+EMC2+QPES+DLFI belongs to the VACON 20 Low Voltage Drives series and supports single-phase input with a nominal input current of 5.7 A. This drive features 2 analog inputs, 6 digital inputs, 1 analog output, and 2 relay outputs. It has a motor power rating of 0.37 kW and weighs 0.55 kilograms.
Internal Product Review
The VACON0020-1L-0002-2+BM1S+EMC2+QPES+DLFI is a highly capable low voltage drive built for single-phase input and 0.37 kW motor applications. RS-485 connectivity and EMC category C2 support give the unit clean integration and dependable electrical performance. Six digital inputs and two relay outputs provide excellent control flexibility for compact automation packages.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0020-1L-0002-2+BM1S+EMC2+QPES+DLFI is an AC variable frequency drive built by Danfoss and assigned to the VACON 20 Low Voltage Drives series. It modulates incoming power so that a small induction motor can operate at a controlled speed in conveyors, pumps, or compact machine modules. By converting a fixed line frequency into an adjustable output, the unit supports efficient operation and allows a PLC to regulate motor speed without mechanical throttling. Its compact design is suitable for control panels and decentralized machine installations where available mounting space is limited.
The drive is intended for single-phase power supplies and supports motors rated at 0.37 kW. Its input draws a nominal current of 5.7 A, while the inverter provides a continuous output current of 2.4 A. Short-term output current can reach 3.6 A for loads that require additional current during acceleration. A 10 A fuse provides the required input-side overcurrent protection. Electromagnetic compatibility is rated as C2, making the drive suitable for installations that require controlled conducted and radiated emissions. Thermal management relies on 10 m³/h of forced airflow to remove heat from the power electronics during full-load operation. Adequate cabinet ventilation must be maintained so that the cooling path remains unobstructed.
The MI1 mechanical size gives the enclosure a small footprint and supports installation in compact control assemblies. Networking is handled through the built-in RS-485 serial interface, which supports multidrop communication with supervisory controls without requiring an additional gateway card. Local logic terminals include two analog inputs and one analog output for reference signals and process feedback. The terminal arrangement also provides 6 digital inputs, two Form C relay outputs, and one transistor output for run commands, alarm monitoring, and contactor control. These connections allow the drive to exchange operating states and control signals with nearby automation devices. The unit has a mass of 0.55 kg, which places little load on the mounting panel and makes the enclosure easier to handle during installation. Its combination of local I/O and serial communication permits either direct terminal control or coordinated operation through a higher-level controller.
