VACON0100-3L-0072-5-FLOW+IP54+DPAP+DLFI+FBIE+EMAR Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 137U4298
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
52 Seconds
The VACON0100-3L-0072-5-FLOW+IP54+DPAP+DLFI+FBIE+EMAR is manufactured by Danfoss and is part of the VACON 100 Industrial Drives series. This drive has a rated motor power of 37 kW at 400 volts, delivers a nominal current of 72 Amps, and supports a maximum output frequency of 320 Hz. It features an IP54 protection rating, EMC Category C2 emission, and operates in ambient temperatures from -10 to 50 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0100-3L-0072-5-FLOW+IP54+DPAP+DLFI+FBIE+EMAR is an AC variable frequency drive from Danfoss that belongs to the VACON 100 Industrial Drives series. It converts fixed-frequency three-phase mains power into a regulated output, allowing controllers to adjust motor speed and torque in automated conveyors, pumps, and material-handling lines. By varying the electrical waveform rather than using mechanical throttling, the unit supports tighter process control and improves energy efficiency across a wide range of industrial automation tasks.
The drive can deliver up to 37 kW to a 400 V motor or 50 HP at 480 V, supplying the continuous shaft power needed for medium-sized machinery. A nominal output of 72 A establishes the thermal design point of the inverter section, while frequency synthesis extends to 320 Hz, allowing high-speed spindles or permanent-magnet motors to run well beyond the standard 50/60 Hz range. Short-duration loads are handled by an overload reserve of 110%, so transient torque spikes do not trigger a trip as long as the event remains brief. Conducted EMC emissions fall within Category C2, making the unit suitable for industrial environments that share switchgear with sensitive instrumentation without requiring cabinet-level shielding.
A two-second surge capability of 122 A accommodates motor inrush or rapid acceleration before current returns to its nominal value. The sealed metal housing carries an IP54 rating and remains functional at humidity levels up to 95% RH. The inverter tolerates a vibration level of 1 g, so it can be panel-mounted on skids or mobile frames without additional dampers. Ambient operation spans -10 °C to 50 °C, covering most indoor production zones, and the physical envelope measures 237 mm wide, 259 mm deep, and 660 mm tall to fit standard motor control center columns. The unit has a mass of 37.5 kg.
