VACON0100-3L-0072-4-X+HGMR Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
0 Seconds
The Danfoss VACON0100-3L-0072-4-X+HGMR is part of the VACON 100 Industrial Drives series and features a nominal current of 72 Amps with a maximum current of 122 Amps for 2 seconds. This drive provides an IP66 / Type 4X enclosure rating and operates with a power factor greater than 0.98. It measures 499.8 mm in height, 349.5 mm in width, and 235.4 mm in depth, weighing 31.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0100-3L-0072-4-X+HGMR is an AC variable-frequency drive produced by Danfoss within the VACON 100 Industrial Drives series. The unit converts fixed-frequency, three-phase mains power into a pulse-width-modulated output, allowing plant controllers to adjust induction motor speed and torque in automated conveyors, pumps, and material-handling cells. As a cabinet-mounted power stage, it provides motor regulation while integrating standard fieldbus and I/O resources used in industrial automation. This combination allows the drive to receive process commands, regulate motor operation, and communicate status information to a higher-level control system.
The motor terminals deliver a nominal current of 72 A for continuous operation, while a short-term surge of 122 A is available for two seconds during acceleration or shock loading. The line-side power factor remains greater than 0.98, reducing reactive demand on the supply network. The cast-metal housing has an IP66 / Type 4X rating, protecting the enclosed electronics against dust, high-pressure water, and corrosive washdown environments. Vibration resistance is rated at 3 g, making the unit suitable for wall-mounted panels on mobile or high-impact machinery. The drive weighs 31.5 kg, and appropriate lifting equipment can support safe handling during installation. Its depth, width, and height are 235.4 mm, 349.5 mm, and 499.8 mm, respectively, which allows enclosure clearances and mounting surfaces to be planned accurately.
The control section provides an auxiliary supply that can source up to 250 mA at 24 VDC for external relays, encoders, sensors, or small signal converters. Command inputs processed through the embedded analog-to-digital stage maintain an accuracy of ±1%, while the analog output channels track setpoints within ±2% when transmitting drive status feedback. For thermistor-based motor protection, the control card energizes the sensor with 3.5 V and trips when resistance reaches 4.7 kΩ. This trip response immediately removes motor torque to help prevent overheating. The thermistor thresholds remain consistent as ambient conditions change, supporting repeatable motor protection across a range of plant temperatures. The available control resources allow external devices to receive power and exchange analog signals without requiring separate low-power interface modules.
