VACON0100-3L-0061-5-FLOW+SBF4+FL03+DPAP+DLNL Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
46 Seconds
The Danfoss VACON0100-3L-0061-5-FLOW+SBF4+FL03+DPAP+DLNL is part of the VACON 100 Industrial Drives series and features frame size MR6. It provides a low-load power of 30 kW at 400 V and 40 HP at 480 V, with a protection rating of IP21. This drive offers 2 analog inputs, 1 analog output, 6 digital inputs, and 2 relay outputs. The maximum current for 2 seconds is 92 A, and it includes one thermistor input with a sense voltage of 3.5 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0100-3L-0061-5-FLOW+SBF4+FL03+DPAP+DLNL is an AC variable frequency drive from Danfoss in the VACON 100 Industrial Drives series. It converts fixed-frequency, three-phase supply power into a regulated output for controlling the speed and torque of induction motors. This capability supports energy-efficient operation of pumps, fans, conveyors, and other variable-torque equipment used in industrial automation.
This model uses the MR6 frame, which establishes the mechanical envelope, terminal spacing, and cooling airflow arrangement. For heavy-duty operation, the inverter supplies a continuous output of 46 A, while light-duty applications can draw up to 61 A. The drive can also supply 92 A for two seconds during short acceleration demands. It provides 6 digital inputs for connecting limit switches, interlocks, and start or stop commands without separate interface modules. Two analog inputs accept process references, while one analog output can transmit operating data to another control device. Two relay outputs handle contactor logic and status signaling. A dedicated thermistor input monitors motor temperature using a 3.5 V sensing circuit, allowing the inverter to stop the motor if excessive heat is detected.
Under high-load conditions, the unit delivers 22 kW at 400 V or 30 HP at 480 V. For low-load operation, it is rated for 30 kW at 400 V or 40 HP at 480 V, providing additional capacity for variable-torque loads. The enclosure has an IP21 protection rating, making it suitable for clean indoor electrical rooms where protection from finger contact and vertically falling water drops is required. Adequate cabinet ventilation must be provided so heat can leave the enclosure and the drive can maintain its rated output. The motor-side thermal protection circuit trips when sensor resistance reaches 4.7 kΩ, disabling inverter output before excessive winding temperature can damage the connected motor. This protective response works independently of the analog reference channels and relay logic.
