VACON0100-3L-0016-5-FLOW+SBF4+IP54+FL02+DPAP+DLDK Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 135N7382
The Danfoss VACON0100-3L-0016-5-FLOW+SBF4+IP54+FL02+DPAP+DLDK drive is part of the VACON 100 Industrial Drives series. It delivers a continuous current of 16 Amps, a maximum current of 24 Amps for 2 seconds, and supports motor power ratings of 7.5 kW at 400 V or 10 HP at 480 V. The drive features two analog inputs, one analog output, six digital inputs, and is rated at IP54 protection class.
Internal Product Review
The VACON0100-3L-0016-5-FLOW+SBF4+IP54+FL02+DPAP+DLDK is a Danfoss industrial drive engineered for dependable motor control, with 16 A continuous current and IP54 protection. Support for 7.5 kW at 400 V and 24 A peak current for 2 seconds gives the unit strong overload capability, making the drive a solid choice for demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VACON0100-3L-0016-5-FLOW+SBF4+IP54+FL02+DPAP+DLDK is an AC variable frequency drive from Danfoss in the VACON 100 Industrial Drives series. It converts fixed three-phase mains power into a modulated output for controlling the speed of induction motors in pumps, blowers, and other flow-related machinery. Field-oriented regulation allows automation systems to adjust energy use and reduce mechanical wear during continuous or variable-duty operation. This control method also supports stable motor torque as operating conditions and process demands change.
The drive supplies a continuous output current of 16 A, while its short-term overload capacity provides 24 A for two seconds, allowing it to start high-inertia loads without tripping. When connected to a 400 V motor, the inverter delivers 7.5 kW of mechanical power, and at 480 V, the same frame supports 10 HP. The analog input converter accepts 0–10 V or 4–20 mA sources and digitizes feedback with a resolution of 0.1 %, enabling precise speed-reference scaling. Built-in power-stage monitoring protects the drive against excessive temperatures. The single analog output can operate control instruments with an impedance of up to 500 Ω, while two relay outputs provide dry-contact status signals for contactors or alarms.
The drive has 6 digital inputs that accept 24 V signals for start, stop, and PID selection. An auxiliary bus supplies the control electronics with 24 V, simplifying sensor wiring and powering the single thermistor input, which trips at 4.7 kΩ. The metal housing meets the IP54 protection rating, helping prevent dust and splashing water from interrupting operation. EMC filtering limits conducted emissions to Category C2. The control terminals share a common ground that is isolated from the power stage, allowing direct connections to PLCs and motor thermal switches without external interface modules.
