Product Description:

The STDS002 timer and controller from Danaher slots into the well-known Timers and Controllers series and shows up ready for fast, steady work. The main highlight is the 600 cpm speed, letting counters, conveyor systems, or industrial sorting lines keep things moving without lag. The minimum count pulse timing sits at 50 ms on/off, so fast pulses get picked up every time, which fits best for high-rate counts or event tracking. Its net weight is just 4 ounces (113.4 g) so adding it to panels or equipment cabinets doesn’t bring extra load, handy when every ounce matters in compact automation spots.

Wiring comes simple through wire leads, 12″ #22 AWG, skipping fussy terminals and keeping the setup short and direct. It takes on 95–125 VAC power and holds in the boundaries with voltage variation allowed at ±10% or 10 V, whichever is limiting. Those numbers keep performance reliable, especially where line voltage shifts around more than it should. With a compact shape and enough tolerance for everyday voltage bumps, this controller suits busy factories or lines that cycle equipment at all hours. For maximum on-time, the AC model holds strong at 10 minutes with a 50% duty cycle, while DC types take continuous operation if that’s in the plans.

Figures and display don’t take a backseat: 5 figures on reset models and 5, 6, or 7 on nonreset versions, so longer batch totals or larger counts fit the job with ease. The figure size of 0.110″ x 0.160″ (2.8 mm x 4.1 mm) and line width of 0.023″ (0.6 mm) keeps readings visible even in low light. Temperature ranges from +32° to +120°F (+0° to +49°C) mean cold shops and hot docks are both fine.