SL5120RGACB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The SL5120RGACB features a luminous intensity of 60 mcd (red) and 110 mcd (green) at 20mA, a typical forward voltage of 2.0V (red) and 2.1V (green), and a wide viewing angle of 120°. Part of Danaher's Timers and Controllers series, it operates within -40°C to +85°C and adheres to RoHS compliance standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SL5120RGACB is a timer from the Timers and Controllers series. The product offers reliable performance across variable operating conditions. It is manufactured by Danaher for industrial timing applications.
The SL5120RGACB provides cycle control with defined ON and OFF durations. This type operates at 120 VAC and has a tolerance of ±15 percent. It can accommodate a frequency of 50 or 60 Hz. The maximum power usage is set at 3 VA. It has an SPDT relay output with one form C contact. The connections are rated for 10 amps resistive at 120 and 240 volts. It also supports 30 VDC at 10 amps. Silver Cadmium Oxide is used as the contact material due to its endurance. The dielectric strength between input and output is 1500 VAC RMS. It has an insulating resistance of 100 megaohms at 500 volts. The reset time does not exceed 100 milliseconds. It has a time range of 0.05 seconds to 3 hours. For more versatility, time can be selected from six distinct ranges. It retains ±0.5 percent repetition accuracy under steady settings. At highest settings, time accuracy is ±5%. The recycle function accurately alternates between ON and OFF cycles. The unit's measurements are 2.99 inches long and 2.44 inches broad. The height is 1.78 inches and the overall weight is 3.5 ounces. The timer features a visible LED dial scale display. The timing status is readily stated during operation. The electrical connection is made using an 8-pin octal socket. The enclosure is made from GE Lexan 940 plastic.
The SL5120RGACB operates efficiently in industrial situations. The operating temperature varies from -10 to 55 degrees Celsius. It can be stored at -20 to 70 degrees Celsius. It can withstand vibrations ranging from 10 to 55 Hz with an amplitude of 0.5mm. The design can withstand mechanical shock up to 10 G. The maximum humidity supported is 95% non-condensing. The timer is certified to UL, CSA and CE standards. It is engineered for repeat cycle timing where precision matters.
Frequently Asked Questions about SL5120RGACB:
Q: How does the octal plug-in base benefit installation of SL5120RGACB?
A: The octal base allows quick plug-and-play replacement without rewiring. This helps reduce downtime during servicing or timer swaps.
Q: Why is shock resistance up to 10 G important in SL5120RGACB?
A: It allows SL5120RGACB to function in high-motion or heavy machinery setups. This prevents internal failure due to mechanical impact.
Q: Why is Silver Cadmium Oxide used in the SL5120RGACB relay contacts?
A: Silver Cadmium Oxide offers excellent arc suppression and extended contact life. It ensures consistent electrical performance under high load switching.
Q: How does the SPDT contact configuration improve flexibility in SL5120RGACB?
A: SPDT allows switching between two outputs from a single input. This makes SL5120RGACB suitable for control logic in multiple applications.
Q: Why is the dielectric strength of 1500 VAC important in SL5120RGACB?
A: It provides electrical isolation between input and output circuits. This protects the device and connected systems from transient voltages.
