P81010Z1200002 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
6 Seconds
The P81010Z1200002 is a magnetic cylinder sensor with a PNP normally open switching output and operates on a voltage range of 10 to 30 V DC. Manufactured by Danaher under their Timers and Controllers Series, it features IP67 protection and an M8 3-pin connector. Additional features include a T-slot mounting type and LED status display.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P81010Z1200002 is a control module designed by Danaher for accurate temperature and process control in industrial settings. It features a 1/8 DIN panel size of 96 x 48 mm and its depth is 100 mm, with a required cut-out size of about 92 x 45 mm for compact installation. This module operates on 100 to 240 VAC power source at 50 to 60 Hz frequency.
The P81010Z1200002 module consumes 7.5 VA of power during operation and its front panel has IP66 along with NEMA 4X protection ratings against dust and moisture. Its rear panel is rated IP20 for safety of internal components and its operating temperature range is from 32°F to 131°F with up to 95% RH in non-condensing conditions. This module features a dual-line LED display for clear readings and its upper red display shows process variables while the lower green display shows setpoints. It supports universal input types such as thermocouples, RTDs and DC signals. Its supported thermocouples include types J, K, T, R, S, B, L, N and PtRh. It supports 3-wire PT100 RTD sensors and its DC input ranges between 4–20 mA, along with 0–10 V. The P81010Z controller offers up to three plug-in output modules for flexibility and its outputs include SPDT relays rated 2A at 240 VAC, SSR drive and triac outputs.
The P81010Z1200002 module supports 0 to 0.02 A and 4 to 0.02 A as DC linear outputs. It provides a 24 VDC transmitter power output at around 22 mA and provides full PID control with auto-tuning, manual mode and on-off control. The P81010Z controller includes high, low and deviation process indicator alarms. It features RS-485 Modbus communication as an optional supported module.
