HZ17050
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The HZ17050 timer and controller offers a maximum count speed of 500 cpm, a reset time of 500 milliseconds, an output rating of 10A at 120V or 5A at 240V, and operates within a temperature range of 0°F to 140°F. Manufactured by Danaher as part of the Timers and Controllers series, it features surface-type mounting with terminal blocks.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danaher introduces the HZ17050 model within its Timers and Controllers series as a versatile general‑purpose totalizer. This device can achieve a count speed of 500 cpm max. and supports high‑rate event tracking without missing counts. A reset time of 500 ms ensures rapid clearing after cycles that allows quick repeat timing. Output rating supports 10 A at 120 VAC or 5 A at 240 VAC which enables direct switching of common industrial loads. Stepping motor input requires 40 ms ON and 80 ms OFF pulses which synchronize count advancement accurately under control logic.
Device’s clutch coil pull‑in time of 50 ms provides prompt actuation to ensure timely engagement during transitions. Alos, clutch coil burden draws 16 VA inrush and 10.5 VA maintained which defines power reserve needs during activation phases. Stepping motor burden of 26 VA inrush defines peak drive requirements that support design of adequate drive supplies. Temperature range spans 0° to 140°F (–18° to +60°C) ensures reliable operation across typical plant conditions. Voltage/Frequency tolerance of 120 or 240 VAC (+10%, –15%) at 50/60 Hz accommodates varied supply grids without external adaptors. Count ranges of 2–100, 1–12, or 1–40 offer flexibility for different counting tasks that allows simple adaptation to application needs.
Remaining features include two SPDT delayed action switches, allowing custom control reactions at specified thresholds. Surface‑type mounting with terminal block enables direct panel installation which simplifies connection. Additional specs from the datasheet include UL Recognition under E96337 as it ensures compliance with North American safety standards. CSA certification LR26861 also adds approval for Canadian installations. The manual lists dial diameter of 77.77 mm further delivers consistent mechanical interface. Weight of about 0.39 lbs. supports compact installation requirements. This timer’s frequency of operation per clutch coil rated at 60 cycles per minute which limits wear during frequent cycling.
Frequently Asked Questions about HZ17050:
Q: What is the purpose of the HZ17050’s maximum count speed specification?
A: The 500 counts per minute maximum count speed enables the HZ17050 to register rapid pulse events continuously, which ensures accurate tracking in fast-cycle manufacturing or monitoring processes.
Q: How does the HZ17050 achieve quick reset functionality?
A: The component resets within 500 ms at maximum setting, which restores the counter quickly after completion.
Q: Why does the HZ17050 provide dual output ratings for different voltages?
A: It offers output ratings of 10 A at 120 VAC and 5 A at 240 VAC to directly drive standard industrial loads at either voltages.
Q: How does the HZ17050’s stepping motor input timing support accurate count increments?
A: Its 40 ms ON and 80 ms OFF stepping motor pulse requirement ensures each count advances precisely, which prevents miscounts during phase‑controlled drive operations.
Q: What is the benefit of the HZ17050’s clutch coil’s pull‑in requirement?
A: A 50‑ms pull-in pulse ensures clutch engagement initiates without delay, which maintains timing accuracy across frequent transitions in automated processes.
