HP5E15A6 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
4 Seconds
The Danaher HP5E15A6 is part of the Timers and Controllers series and supports a supply voltage of 120 VAC at a supply frequency of 50/60 Hz. It features a maximum time setting of 10 seconds, a contact rating of 10 A at 120 VAC, and a motor rating of 1/6 HP at 120 VAC. The unit weighs 1.7 pounds and measures 3.062 by 4.125 by 5.750 inches.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HP5E15A6 is a time-delay relay manufactured by Danaher within the Timers and Controllers series. This electromechanical unit provides adjustable off-delay or on-delay functions for conveyors, heaters, and other industrial loads, allowing automation sequences to pause or overlap precisely. By combining a synchronous motor, cam dial, and integral contacts, the relay provides a repeatable timing window so downstream devices energize only after the programmed interval has elapsed. Its adjustable operation supports timing tasks in packaging equipment, process machinery, and other automated systems that require controlled load sequencing.
The relay operates from a single-phase 120 VAC supply at 50/60 Hz, tolerates a supply variation of +10% to -15%, and draws only 1.5 W to minimize panel heat. Its output circuit is rated for 10 A at 120 VAC, and the relay can switch motor loads up to 1/6 HP at 120 VAC without an external interposing contactor. Timing is set with a dial graduated in 0.2-second divisions, allowing selection between a 0.2-second minimum and a 10-second maximum. Once the timing interval is adjusted, cycle-to-cycle variation remains within ±0.05 seconds, helping protect processes that are sensitive to timing drift. The contact set is designed for 250,000 operations at full load. The compact steel case measures 3.062 × 4.125 × 5.750 inches, allowing dense mounting on back panels. The unit weighs 1.7 lb, so standard screw-mounted brackets provide sufficient support.
The armature closes in 28 ms and releases in 17 ms, supporting machines that perform several indexed cycles per minute. After each operation, the mechanism is ready for the next cycle following a 500 ms reset interval. Uniform graduations on the front dial allow timing settings to be changed quickly and accurately for different operating sequences. The release gap helps prevent contact chatter when supply conditions fluctuate, reducing unintended output transitions. These operating characteristics make the relay suitable for controlling heaters, conveyors, mixers, and compact production equipment where repeatable timing affects process coordination.
