HP59B616 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher HP59B616 is part of the Timers and Controllers series and operates as a reset timer with a full-scale time of 10 hours and a minimum dial setting of 20 minutes. It features a supply voltage of 240 VAC at 60 Hz and has an output rating of 5 Amps resistive at 240 VAC. The timer uses a synchronous motor for timing, is housed in ABS material, and has knob adjustment with a repeat accuracy of ±3 minutes.
Internal Product Review
The HP59B616 is a Danaher reset timer built for dependable timed control with a synchronous motor timing method and a 10-hour full-scale range. Knob adjustment and ±3 minute repeat accuracy make setup straightforward and cycle performance consistent. A 0.5 second reset time is a strong advantage for responsive machine sequencing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HP59B616 is a reset timer produced by Danaher within the Timers and Controllers series. In automated lines, it introduces deliberate delays or cycle limits so downstream devices engage only after a preset interval has elapsed. This controlled timing prevents overlap or excessive travel in mechanical processes while helping maintain coordinated operating sequences.
This unit operates from a nominal supply of 240 VAC at 60 Hz, and it tolerates line variations of +10/-15% without drifting from its programmed timing span. The output contacts have a rating of 5 A resistive at 240 VAC, allowing direct switching of contactors or signal lamps in low-power branches. A clutch burden of 10.5 VA indicates the apparent power drawn by the internal drive when the timer is energized. For extended timing tasks, the dial can be set for up to 10 hours, and cumulative error across repeated cycles is held to ±3 minutes, supporting predictable dwell periods in batch processes. The reset timer restarts its scale at zero whenever the controlling contact initiates a reset. Its synchronous timing mechanism advances uniformly across the available range.
The dial has a circumference of 7.85 inches and is divided into 10-minute increments. Individual graduations can be selected down to a 20-minute minimum setting through the front-panel knob. The reset impulse clears the scale in 0.5 second, permitting the rapid restart of sequential operations. Internal gearing is driven by a synchronous motor, which provides a stable timing rate without relying on spring tension. The ABS housing resists impacts that can occur inside control cabinets. Fifteen numbered screw terminals provide organized connection points for the control, power, and reset circuits, while the knob-adjustable setting method allows the cycle length to be changed without tools.
