HP56A60192 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
6 Seconds
The Danaher HP56A60192 is a timer from the Timers and Controllers series with a voltage rating of 120 VAC and a frequency of 60 Hz. It features a reverse start control action, maximum setting of 30 minutes, minimum setting of 1 minute, and an output rating of 10 Amps at 120 VAC. The enclosure is HN383 explosion proof and the device offers a repeat accuracy of plus or minus 9 seconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HP56A60192 timer is produced by Danaher within the Timers and Controllers series and is intended to start and stop industrial processes on a fixed cycle. It is a pneumatic interval timer that uses reverse-start control, meaning the timing cycle begins as soon as supply power is removed from the control terminals. With a dial circumference of 7.85 inches and divisions of 0.5 minute, the timer can be set for delays between one and thirty minutes. This adjustable range supports timed control of pumps, heaters, material conveyors, and other industrial equipment.
The internal magnetic clutch draws 10.5 VA, while the synchronous motor requires only 2.45 VA, so the unit places a minimal load on a 120 VAC panel circuit. Its coil is wound for 60 Hz, ensuring synchronous rotation of the time-base gear train when connected to North American mains power. The timer has a pull-in time of 28 ms, which indicates how quickly the relay armature engages after the driving voltage is applied. Its dropout time is 17 ms, indicating how quickly the armature releases after the voltage is removed. These response times help the switching mechanism operate cleanly during repeated start and stop cycles.
The SPDT output is rated at 10 A at 120 VAC, allowing direct switching of solenoid coils or fractional-horsepower motors without an interposing relay. Over successive cycles, the mechanism maintains a repeat accuracy of ±9 seconds, helping keep process timing within a consistent window. After each operation, the spring return provides a reset interval of 0.5 second, during which the dial returns to zero before the next command. The cast aluminum housing has an HN383 explosion-proof rating to help prevent the ignition of flammable vapors in Class I hazardous locations. It also accepts conduit glands for sealed wiring while preserving enclosure integrity around the electrical connections. The sealed housing protects the timing mechanism from surrounding industrial conditions while allowing the timer to control connected equipment through its SPDT contacts.
