HP54A6 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
17 Seconds
The Danaher HP54A6 is part of the Timers and Controllers series and is designed for a supply voltage of 120 VAC with a line frequency of 60 Hz. The timer features a maximum time setting of 60 seconds, a dial division of 1 second, and an output rating of 10 A resistive at 120 VAC. It comes in an ABS housing with a dial circumference of 7.85 inches and a repeat accuracy of ±0.3 seconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HP54A6 is an electromechanical timer manufactured by Danaher and grouped within the Timers and Controllers series. It fits into relay logic panels and machine control cabinets where a repeatable time delay is needed to start, stop, or interlock devices such as solenoids, clutches, or heaters in automated processes. Its nonmetallic ABS housing provides electrical insulation and resists oils and ordinary contaminants commonly found around industrial machinery. The lightweight case also reduces the load placed on the surrounding panel structure.
This model operates from a nominal 120 VAC supply at 60 Hz, so it can be wired directly to standard North American control power without a transformer. When first energized, the coil can draw up to 10 A of inrush current. The isolated output contacts have a rating of 10 A resistive at 120 VAC, allowing the timer to switch compatible control and lamp loads without an interposing relay. Cycle-to-cycle deviation remains within ±0.3 sec, supporting repeatable sequencing in high-speed indexing equipment. Internal power consumption is divided between a 10.5 VA clutch burden that moves the dial cam and a 2.45 VA synchronous motor burden that keeps the mechanism synchronized with the power supply. Time is adjusted on a 7.85-inch-circumference dial with 1-second divisions, and the pointer can be positioned as low as 2 seconds for short impulse control.
A maximum setting of 60 sec supports longer purge, prelubrication, and delay-off functions. The built-in mechanism resets in 0.5 sec, minimizing the interval before another operating cycle can begin. The dial has a circumference of 7.85 in, providing clear spacing between its graduated marks for accurate adjustment. Installation requires a round panel opening measuring 3.187 in, which helps the unit fit into densely arranged control stations. Fifteen screw terminals provide separate connections for the power supply, common conductors, and multiple contact forms. This terminal arrangement accommodates single-shot and recycle wiring schemes without requiring jumpers between the available connections.
