HA42A6A211J Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
7 Seconds
The HA42A6A211J is a film capacitor manufactured by Danaher. Part of the Timers and Controllers series, it features a polyester dielectric and operates with a rated voltage of 100V. This capacitor has a capacitance of 210 pF with a tolerance of ±5%. Its case size is 7.2 x 6.5 x 2.5 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HA42A6A211J is a member of the timer and controller series built by Danaher, for adjustable delay control in automation systems. It has 3 SPDT relay contacts for switching and each of its contact is rated for 15 A, 120 V AC resistive. The timer’s contacts are cam-actuated and driven by the movement of an internal synchronous motor for precise cycle control.
The HA42A6A211J timer has a delay timing range that is adjustable from 0 to 120 seconds and it operates on 120 VAC ±10% at 60 Hz single-phase power. Its dual-scale micrometer dial enables fine timing adjustments and a solenoid clutch mechanism engages the timing cycle on activation. Its timing accuracy remains consistent regardless of the connected load and electrical reset occurs automatically when power is removed, no manual reset is required for reuse. The HA42 timer possess a cycle progress pointer moving with the ellipse of time, that is visible on the front dial. It comes with silver alloy material contacts to support long service life; it is suitable for controlling motors and heating loads up to 1/3 HP at 120 V AC. The HA42 timer is built with a heavy-duty metal enclosure and it weighs approximately 3 lbs.
The HA42A6A211J timer’s rear terminals provide screws with block connections and it mounts through a 4-inch circular panel cutout through its provided rear studs or an optional clamp ring. Its overall dimensions are approx. 6.5 x 5.5 x 4.5 inches and it is UL/CSA certified for control cabinet use. The HA42 timer is designed to perform well in dusty or damp conditions, within an ambient thermal range from 0 °C to 60 °C and an optional NEMA-4 splashproof housing is supported as well for protection.
