DA1618A301 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The DA1618A301 is a compact timer/controller with a body depth of 66.7mm and a general-purpose NEMA1 enclosure. Manufactured by Danaher, it belongs to the Timers and Controllers series and operates at 120 V and 50/60 Hz frequency. The controller has a total depth of 108mm including terminals.
Internal Product Review
The DA1618A301 timer features an easy analog setpoint adjustment. It uses a square base relay socket for its connection. The timer supports AC and DC operating voltages.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danaher DA1618A301 repeat cycle timer alternates between ON and OFF time periods when its control input terminal has an active power connection. This timer is unaffected by 600 V peak transients on the line input for 50 ms. The product’s cycle progress is indicated by the pilot lights. This device incorporates a relay with an output rating of 10 A. The unit’s knobs and pilot lights are located on the front panel for easy access. It features a variable temperature of +/-2% of the settings. This timer’s knobs have calibrations on them.
The product uses a latch and latch release kit comprising a spacer, a latch, latch release and mounting hardware for surface mounting. This device’s front panel has a size of 90 x 42 mm. The unit depicts a setting accuracy within +/-10% of the maximum range. Its timing function is triggered by integrated CMOS circuits. This timer houses a molded NORYL case. The product’s output relay features a mechanical life of over 20 million operations. This device’s variable voltage is set at +/-1% of the operating voltage. The unit’s OFF knob has a minimum time setting of 24 seconds and a maximum setting of 4 minutes. It features a 65 ms reset time.
This repeat cycle timer is intended to be operated between 32 °F and 140 °F. The product portrays a 30 ms maximum power on response after its A and B pins are supplied with line voltage. This device is FM approved. The unit is intended for industrial applications only. Its internal oscillator is set by a potentiometer and a precision capacitor.
